COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

PRODUCTyNA14E CHLORINE (LIQUID OR CAS) 6. ACCIDENTAL RELEASE MEASURES T V1-Vl"70 PERSONAL PRECAUTIONS: OEC 8 W L Evacuate unnecessary personnel. ---- SAN 1UAt�fi�1� (;vied r Of k59 ENCY S" Keep unprotected personnel upwind of the spill area. Follow protective measures provided under Personal Protection in Section 8. ENVIRONMENTAL PRECAUTIONS: Contain liquids and prevent discharges to streams or sewers, control or stop the loss of volatile materials to the atmosphere. Large leaks may require environmental consideration and possible evacuation. Do not apply water to the leak. Spills or releases should be reported, if required, to the appropriate local, state and federal agencies. Spills of chlorine of 10 or more pounds must be reported to the National Response Center, 1-800-424-8802. METHODS FOR CLEANING UP: Move leaking container to an isolated area. Position to release gas, NOT LIQUID. Chlorine can be absorbed into an alkaline solution such as caustic soda, soda ash or hydrated lime. 7. HANDLING AND STORAGE HANDLING: Follow safety procedures for containers of compressed gases. Provide special training to workers handling chlorine. Avoid breathing vapor or gas. Do not get in eyes, on skin, on clothing. Do not heat container. Wear all protective equipment as described in Section 8. SPECIAL MIXING AND HANDLING INSTRUCTIONS: Do not allow contact with materials as noted in Section 10. STORAGE: Store containers in a well ventilated area of low fire potential and away from incompatible materials (see Section 10). Keep away from heat and sources of ignition. Protect container from weather and physical damage. Regularly test and inspect piping and containment used for chlorine service. Liquid levels should be less than 85% of tank or cylinder capacity. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION ENGINEERING CONTROLS: General room ventilation plus local exhaust at points of emission to maintain levels of airborne contaminants below exposure limits.