Laserfiche WebLink
Jul 24 09 02:27P Elite_IV Contactors 12094616342 p.4 <br />` ,'Model 662 Emergency Shut-OfValves <br />EBW`s emergency shut-off valves immediately stop product flow in the <br />event of fire or collision at the dispenser. A patented adaptor shears clean <br />upon impact, causing the poppet to seal on the valve body preventing <br />fuel spillage. When fire occurs, a fusible link releases the fulcrum arm, <br />engaging the poppet. Standard 1.5" NPT openings allow minimal flow <br />restriction and a pre -drilled test plug is included for line pressure testing. <br />The valve can be boss or U -bolt mounted. Easy to replace adaptors slide <br />on and off valve base without lifting the dispenser. Adaptors are avaiable <br />in male, female or union connections. <br />Single poppet models stop product flow from the pump. Double poppet <br />models stop flow from the pump and dispenser piping. <br />The closing feature of an automatic shut-off valve must be checked at <br />least once per year by manually tripping and holding linkage. <br />All models come with female and <br />male threaded base and Boss and <br />IOUNT U -bolt mount base. <br />FEMALE THREADS <br />BOLT MOUNT <br />MALE THREADS <br />Design Highlights & Advantages <br />■ Fire protection fusible link <br />closes poppet in the event of a fire <br />(165° F & 73.9° Q. <br />■ Single and double poppet. <br />■ Main poppet seals in valve body' <br />preventing accidents when <br />replacing adaptors. <br />■ Zinc -plated body corrosion <br />protection. <br />• Solid 318" test plug area prevents <br />body from cracking if plug is over <br />tightened. <br />Certif * • <br />UL and ULC Listed <br />* Meets NFPA 30A requirements <br />** Biofuel`Approved (E85 and biodiesel) <br />MATERIALS <br />Top: Zinc -plated cast iron <br />Body: Zinc -plated cast iron <br />Poppet: Fluorocarbon <br />Carrier: Zinc -plated steel <br />Stem: Stainless Steel <br />Poppet Spring: Stainless steel <br />O-ring: Fluorocarbon <br />Packing Nut: Brass <br />Inlet & Outlet thread: 1.5" NPT <br />(BSPT threads available) <br />15 <br />