INSTALL_2006 - Laserfiche WebLink

Home Browse Search

► Dual--f'cat and tachnology mortals — idaal for loco -tons wPh high or low water tabies. Dual-;IcaTncd�l c'ir: ar=rtiaias barveen high and lclw Laval ccndiiicns. �arlsLrs insJlad in br:ra-filled reservoir of doubia-,>>all tanks. Lcc�rable, ,vatart ghi cap prajvants accidental spills into monitcrirg arae. ► Lcng-Ii:a construction sed reusable. ► Designad arra tastad to comply with UL and CSA standards. Veeder-Root's Hydrostatic Reservoir Sensor accu- rately detects fluid level change in the reservoir and interstice of a double-wall storage tank. Available in a dual -float or single -float configuration. The Dual -Float Hydrostatic Sensor is ideal for high, groudwater areas, and can differentiate between a high level alarm condition and a low level alarm condition. If an inner -wall leak occurs, the brine solution seeps into the tank lowering the brine level in the reservoir. The Dual -Float Sensor will then trigger a low level alarm. If an outer -wall leak occurs, the groundwater seeps into the reservoir. The Dual -Float Sensor will then trigger a high level alarm. IV I The Single -Float Sensor is ideal for low groundwater areas, since it only detects low level alarm condi- tions. If an inner -wall leak occurs, the brine solution seeps into the tank. If an outer -wall leak occurs, the brine solution leaks out of the tank. In both cases, the brine level decreases and the Single -Float Sensor triggers a low level alarm. The housing is constructed of clear PVC, allowing the operator to pull the sensor from the reservoir to visually inspect float operation. A watertight, lock- able cap prevents accidental spills on the ground surface from entering the reservoir. Veeder-Root warrants the Hydrostatic Reservoir Sensors are warranted to be free from material defects for a period of one year from the date of installation or 15 months from the date of invoice. Detactfon C.apabilliias > Dual -Float sensor alarm conditions: Leak in inner wall triggers a low level alarm. Leak in outer wall triggers a high level alarm in high groundwater areas, low level alarm in low groundwater areas. ► Single -float sensor alarm conditions: Leak in inner or outer wall triggers a low level. alarm in low groundwater areas. Operating Capabilities ► Operating Temperature Range: -250C to +40°C. ► Storage Temperature Range: -400C to + 700C. ► Rests in salt brine solution of up to 30% calcium chloride. ► Cable length: 12 feet ► Single -Float Sensor Dimensions: 6.0' high, 2.5' diameter ► Dual -Float Sensor Dimensions: 19.3' high, 2.5' diameter > Withstands removal from reservoir several times a year without sensor damage. s Clear plastic housing for visual inspection of float operation.