Laserfiche WebLink
07/12/2006 10:37 6613257063 DIMAG PAGE 14 <br />File MH45027 Vol.- 1 Sec. 1 Page 3 issued: 1999-11-04 <br />and Report Revised: 2003-06-12 <br />CQNSTRUCT20N PE"TAILS: <br />1- Dispenser Sumps Extension6 - Fabricated of 1/4 in_ thick (minimum) <br />glass fiber reinforced plastic in the dimensions indicated in the <br />drawings tabulated below. sumps are fabricated by application Of <br />catalyzed resin and chopped strand glass to a prepared mold using a <br />Chopper gun. Wetted glass is rolled out to remove all air_ Dace <br />cured, the part is removed from the mold, inspected and trimmed. <br />SYLME Model illustration <br />UFD series 2 <br />UFS Series 3 <br />Ti82014 4 <br />US4221 5 <br />UFS4822 9 <br />DF8482281 Exteusi.on 7 <br />nFEA3 G%=p a/Extension a <br />The sumps shall be fabricated using the following materials: <br />Resin - Hanna "ISD RX1087", Fart No. ARPX1087 <br />Catalyst - Hanna "A20X", Part No- NOA20X <br />Glass Matts - Owens Corning Fiberglass 1-1/2 oz, 2 and 6 in. glass <br />matts supplied by Manna and designated "OCM723152- and 10CM7231.5611- <br />Alternately, the sumps may be fabricated of the following materials: <br />Resin - Reichhold UTA Component Recognized Resin (EGVV2) designated as <br />"Polylite 33450-(a)'", where (a) is any number from 00 to 99, inclusive. <br />Catalyst - Methyl ethyl ketone peroxide (MBKP), 1.0 to 1.25 percent. <br />Glass Fiber Reinforcement <br />Glass Chopper Roving <br />1- vetrotex/Certainteed Corp. 292 <br />2. PDC Hybon 6000 <br />3, PPG Hybon 6700 <br />4. Skoplast 814 <br />5. Owens-Corning 357 <br />6. rapan Central IRS 2310-230b <br />7. Ashland Dist. g -Blass Roving 2400 BC <br />