SR0078989 - Laserfiche WebLink

Home Browse Search

PF Series 4" (100 mm) Submersible Effluent Pumps Applications Our 4" (100 mm) Submersible Effluent Pumps are designed to transport screened effluent (with low TSS counts) from septic tanks or separate dosing tanks. All our pumps are constructed of lightweight, corrosion -resistant stainless steel and engineered plastics; all are field -serviceable and repairable with common tools; and all 60 -Hz PF Series models are CSA certified to the U.S. and Canadian safety standards for effluent pumps, meeting UL requirements. Orenco's Effluent Pumps are used in a variety of applications, including pressurized drainfields, packed bed filters, mounds, aer- obic units, effluent irrigation, effluent sewers, wetlands, lagoons, and more. These pumps are designed to be used with a BiotubeO pump vault or after a secondary treatment system. Cr UL 0 m CL N aC Us Discharge connection — Bypass orifice Suction connection Powered by Franklin Electric " • 1�7 ce 8110.848.9843 Features/Specifications To specify this pump for your installation, require the following: • Minimum 24-hour run -dry capability with no deterioration in pump life or performance* • !/a -inch (3 -mm) bypass orifice (patent pending) to ensure flow recirculation for motor cooling and to prevent air bind • Liquid end repair kits available for better long-term cost of ownership • TRI-SEALTm floating impeller design on 10, 15, 20, and 30 gpm (0.6, 1.3, and 1.9 Usec) models; floating stack design on 50 and 75 gpm (3.2 and 4.7 Usec) models • Super stainless Franklin Electric motor, rated for continuous use and frequent cycling • Type SOOW 600-V motor cable (suitable for Class I, Division 1 and Division 2 applications) • Five-year warranty on pump or retrofit liquid end from date of manufacture against defects in materials or workmanship * Not applicable for 5 -hp (3.73 kW) models Standard Models See specifications chart, pages 2-3, for a list of standard pumps. For a complete list of available pumps, call Orenco. Nomenclature PF FO -71 L�®-F-1 I Cord length, fl (m) Blank = 10 (3) 20' = 20 (6) 30 = 30 (9) 50 = 50 (15) Voltage, nameplate: 1 = 1152 200 = 200 2 = 230' 4 = 460 Frequency: 1 = single-phase 60 Hz 3 = three-phase 60 Hz 5 = single-phase 50 Hz I Horsepower (kM: 03 = 'h hp (0.25) 05 = 1' hp (0.37) 07 = 3A hp (0.56) 10 = 1 hp (0.75) 15 = 1-14 hp (1.11) 20 = 2 hp (1.50) 30 = 3 hp (2.24) 50 = Shp (3.73) Nominal flow, gpm (L/sec): 10 = 10 (0.6) 15 = 15 (1.0) 20 = 20 (1.3) 30 = 30 (1.9) 50 = 50 (3.2) 75 = 75 (4.7) Pump (PF Series) LR80980 ' Note: 20 -foot cords are available only for single-phase pumps through 1-)4 hp LR2053896 ')�-hp (0.37kM only ' 220 volts for 50 Hz pumps ® Z012 Orenco Systems® Inc. NTD -PO -PF -1 Rev. 20, m 01/12 Page 1 of 6