Laserfiche WebLink
03/22/2012 06:17 0000000000 <br />File MH29467 Page Tl -2 of 2 Issued_ 2005-09-08 <br />S1MUL;MD USE RESISTANCE TO FLUIDS TEST (FIBERGLASS REINFORCED PLASTIC SUMP <br />MATERIALS); <br />METHOD <br />One sample assembly as described in Item a was placed in a container <br />filled with each of the flui-is Listed below such that the fittings l,nside the <br />container were completely covered with the fluids_ The samples and fluids <br />were maintained at a temperature of 100°F throughout the exposure. Following <br />30 days in this condition, the containers were subjected to an internal <br />pressure of 4.5 psig (based on a maximum sump depth of 10,3 ft.) for a period <br />of at least 5 min. while the samples were examined f -or evidence of leakage. <br />100% Methanol <br />505 Methanol/50* ASTM Reference Fuel C <br />15!k ttlsanol/851: ASTM Reference Fuel C <br />10% Ethanol,/90t ASTM Reference Fuel C <br />15% MTBE/85" ASTM Reference Fuel C <br />RESULTS <br />There was no evidence of leakage <br />SIMULATED USE RESISTANCE TO FLUIDS TEST Wl$ERGLASS REINFORCED PLASTIC SUMP <br />MATERIALS). <br />METHOD <br />one sample assembly as described in Stem C was placed in a container, <br />filled with each of the fluids Listed below such that the fittings .inside the <br />container were completely covered with the fluids. The samples and tl,tti,ds <br />were maintained at a temperature of 100°F throughout the exposure. Following <br />30 days in this condition, the containers were subjected to an internal <br />pres;rure of 4.5 prig (based on a maximum sump depth of 10.3 ft.) fox a period <br />of at least 5 m1n. while the samples were examined for evidence of leakage. <br />100 Methanol <br />501 Methanol/50* ASTM Reference Fuel. C <br />100% Ethanol <br />501 Ethanol/50% ASTM Reference Fuel C <br />15!4 gthanol/852 ASTM Reference Fuel C <br />10 Ethanol/901 ASTM Reference Fuel C <br />1.59t MTBE/851: ASTM Reference Fuel C <br />RESULTS <br />There was no evidence of .leakage <br />PAGE 24/30 <br />Dfversifled Products Manufacturing Inc. Approvals for Tech Manual Rev 2 Page 9 of 13 <br />