Laserfiche WebLink
Angled Entries <br />Primary pipe and access pipe entering the containment sumps may not be perpendicular <br />with the sump wall. Angled entries are generally a result of directional plumbing restrictions <br />on the inside of the containment chamber due to space limitations. Flexible entry boots are <br />flexible enough to permit angled pipe or conduit entries (on two axes) into the sidewall of a <br />containment chamber. All flexible entry boots permit angled entries up to a 15 -degree angle <br />off the perpendicular center line in any direction without leaking or putting undue stress <br />on the pipe or conduit seal. <br />Ordering Specifications - Single Flexible Entry Boot and Fitting <br />Model # <br />Application <br />Hole Saw <br />in. <br />cm <br />EBF -0751 <br />112", 314" and 1" Conduit Entry Boot Fitting <br />2318" <br />6.03 <br />EBF -0150 <br />1.5" Entry Boot Fitting for 1.5" DW FlexWorks Pipe <br />3.314" <br />9.52 <br />EBF -0200 <br />2" Entry Boot Fitting for 2" DW FlexWorks Pipe or 2" LCX <br />3.314" <br />9.52 <br />EBF-020OF <br />2" Entry Boot Fitting for 2" Rigid Pipe <br />3.314" <br />9.52 <br />EBF -0300 <br />3" Entry Boot Fitting for 3" DW FlexWorks Pipe or <br />3" Rigid Pipe/LCX <br />5„ <br />12.7 <br />EBF -0400 <br />4" Entry Boot Fitting for 4" Rigid Pipe/AXP Pipe <br />5.112" <br />13.97 <br />EBF -0600 <br />6" Entry Boot Fitting for 6" Rigid Pipe <br />Saber Saw <br />SAB -7400 <br />4" Sump Access Boot <br />5" <br />12.7 <br />Flexible Entry Boot Manual Order Number: EBM-0001 <br />F/e,*W R K; <br />BY DPW FUELING CONTAINMENT SYSTI <br />Flexible Entry Boots <br />FlexWorks Flexible Entry Boots are <br />reliable, safe seals for pipe and condui <br />entries into underground containment <br />sumps. These entry boots allow for <br />angled pipe entries and have no <br />exposed metal parts to the undergrour <br />environment. These entry boots are <br />available in a variety of sizes and <br />designs to accommodate rigid and <br />flexible piping, ducting and access pipe. <br />Features & Benefits: <br />♦ Watertight pipe and conduit entries <br />♦ Installation on flat or round surface <br />♦ Added flexibility permitting angled <br />entries up to 15 degrees <br />♦ Third -Party testing approved <br />Sump Entry <br />Flexible entry boots have been tested <br />to withstand a minimum of 6' of liquid <br />head pressure. These seals provide <br />a studded flange connection to create <br />a positive and secure seal where the <br />rubber contacts the sump wall and also <br />around the pipe or conduit. Tightening <br />down on a series of stud fasteners with <br />a compression ring provides a high <br />compression mechanical seal compared <br />to screw on type bulkhead seals. <br />O P W <br />BW61 co MV — <br />47 <br />