COMPLIANCE INFO_1998 -2011 - Laserfiche WebLink

Home Browse Search

11/30/2001 09:55 7078383708 WHITEMAN PETROLEUM PAGE 05 Tank Sumps Tank Sumps are used at the beginning of the QeoFfex Piping System. Installed on the kip of the tank, they provide surface access to a tank's pump, fittings and Other piping connectior,e They 111180 serve as a means of secondary containment and leak oollectlon. Stabilizer Bar Assemblies Required for all Standard Dispenser Sumps. Includes: stabilizer bar with fasteners, spacer plate and valve plate with fasteners- Accommodates boss mounted shear valves only. SbBblltzer Bars must be installed prior to bodditiig or pouring concrete. Piping System Components rr''yy'yy f• In-line Piping Sumps hkim Ptpinp Sumps are used for long plping rums width require the connection of two pipe sections - This sump provides surface access and secondary containment for these ptumbii g connections. May also be used to oontain other pwwV components. Flexible Entry Boots These rubber compression type boots are installed into the wall of containment sumps to seal all pipe and conduit entries. The 1.112" (FEB -8150) entry boot is used for ap 1-112" GooF1kn Pipe entries. A variety of sizes are available to seal rigid pipe am conduit. Junction Tees A braes fitting Installed In iunctipn type Dispenser Sumps. Typically used In pressure piping systems which are nested to series. This tee has two threaded openings for coupling connections and one threaded opening for riser pipe connections. Shallow Dispenser Sumps Shallow containers for under dispenser containment. Recom- mended for all auction type piping systems and pressure piping systems using the Uqufd krtembliai Monitoring System. They prcrv+de convenient access to, end secondary contakirnertt of, the pipe connections. GeoFfex Piping A flexible underground piping used for use trarwnLow of flammable and other types of hazardous "studs in both pressure and suction type systems. Bosh Geehlex I A It are avaiiabie in 1-112" and 2" pipe saes packaged In eNher cartons or reela- Terminating Elbows A brass fitting installed in terminating type Dispenser Sumps. Used in both pressure and auction piping systems. this elbow fitting has one threaded opening for coupling connectiona and one threaded opening for riser pipe connections. Deep Dispenser Sumps Deep containers for Lint dispenser containment- us primarily for pressure pipi systems which are routed in ear and require piping fall to one more containment sumps. St provide Convenient access te, i secondary containment of, the p connections. Pipe Couplings These brass couplings designed epectficatly for GWF Piping. They are Interni expanded to the ends of flexible pipe section using Environ Coupling Machine, L c:ouplirg assembly Includes a br ff"M swlvel and ferrule. Product Offsets Used with some model dispensers which require pipe entry locations significantly off center. The offset fitting permits the use of standard dispenser sumps to accommodate these applications Refer to the Dispenser Directory for those dispenser models which require the use of product offsets.