Laserfiche WebLink
TYPICAL LIQUID PROPERTIES AT 25°C/ 77'F <br />Properties Unit Value Test Method <br />Flash point Seta Closed Cu °C/ °F 32/89 ASTM D 3278 <br />Shelf Life Minimum months 3 - <br />TYPICAL NON REINFORCED MECHANICAL PROPERTIES AT 250C/77°F <br />Properties <br />Unit <br />Value <br />Test Method <br />Tensile Strength <br />psi <br />9,300 <br />ASTM D 638-02 <br />Tensile Modulus <br />K si <br />590 <br />ASTM D 638-02 <br />Tensile Elongation <br />% <br />2.4 <br />ASTM D 638-02 <br />Flexural Strength <br />psi <br />16,600 <br />ASTM D 790-02 <br />Flexural Modulus <br />K si <br />520 <br />ASTM D 790-02 <br />Heat Deflection Temperature <br />°C/ °F <br />107/225 <br />ASTM D 648 <br />Hardness, Barcol Model 934-1 <br />HB <br />40 <br />ASTM D 2583-99 <br />TYPICAL LAMINATE PROPERTIES AT ELEVATED TEMPERATURES <br />Temp <br />°C/°F(psi) <br />Tensile Strength <br />Tensile Modulus <br />(Kpsi) <br />Flexural Strength <br />(psi) <br />Flexural Modulus <br />(Kpsi) <br />25/77 <br />19,900 <br />1,630 <br />31,000 <br />1,380 <br />66/150 <br />22,500 <br />1,510 <br />28,600 <br />1,200 <br />93/200 <br />25,000 <br />1,380 <br />24,000 <br />850 <br />121/250 <br />17,000 <br />870 <br />14,700 <br />500 <br />149/300 <br />13,200 <br />870 <br />4,300 <br />300 <br />Laminate Construction: V/M/M/WR/M/WR/M/M (V = 10 -mil C -glass veil, M = 1.5 oz/ft` chopped strand mat, WR = 24-oz/yd` <br />woven roving) <br />Glass Content: 40% by weight <br />Thickness: 0.25" <br />STORAGE <br />To ensure maximum stability and maintain optimum resin properties, resins should be stored in the original closed container at <br />temperature below 24°C/75°F and away from heat ignition sources and sunlight. Resin should be warmed to at least <br />18°C/65°F prior to use in order to assure proper curing and handling. Mild agitation of thixotropic resins is recommended after <br />prolonged storage. Avoid contamination of product with water and do not store outdoors. Keep containers sealed to prevent <br />moisture pick-up and monomer loss. Maintain first in first out inventory system. All storage areas and containers should <br />conform to local fire and building codes. Copper or copper containing alloys should be avoided as containers. Store separate <br />from oxidizing materials, peroxides and metal salts. Keep containers closed when not in use. Inventory levels should be kept <br />to a reasonable minimum with first -in, first -out stock rotation. <br />Additional information on handling and storing unsaturated polyesters is available in Reichhold's application bulletin "Bulk <br />Storage and Handling of Unsaturated Polyester Resins." For information on other Reichhold resins, additives or initiators, <br />contact your sales representative or authorized Reichhold distributor. <br />SHELF LIFE <br />Shelf life is 3 months from date of shipment. Minimum shelf life performance refers to product in the original, unopened <br />container. <br />STANDARD PACKAGE <br />This product is available in non -returnable 55 gallon metal drums (496 Ib) or 44,000 Ib tank truck. <br />SAFETY <br />READ AND UNDERSTAND THE MATERIAL SAFETY DATA SHEET BEFORE WORKING WITH THIS PRODUCT <br />Obtain a copy of the material safety data sheet on this product or contact the Reichhold service center prior to use. Material <br />safety data sheets are available from your Reichhold sales representative. Such information should be requested from <br />suppliers of all products and understood prior to working with their materials. <br />DION° 6631 Series <br />Page 2 <br />