Laserfiche WebLink
Monitoring System Certification <br /> D. Results of Testing/Servicing <br /> Software Version Installed: <br /> Complete the following checklist: <br /> ❑ Yes ❑ No* Is the audible alarm operational? <br /> ❑ Yes ❑ No* Is the visual alarm operational? <br /> ❑ Yes ❑ No* Were all sensors visually inspected,functionally tested,and confirmed operational? <br /> ❑ Yes ❑ No* Were all sensors installed at lowest point of secondary;containment and positioned so that other equipment will <br /> not interfere with their proper operation? < <br /> ❑ Yes ❑ No* If alarms are relayed to a remote monitoring Station, is all communications .equipment (e.g., modem) <br /> ❑ N/A operational? '� �� <br /> ❑ Yes ❑ No* For pressurized piping systems, does the turbine\automatically shut down if the piping,secondary containment <br /> ❑ N/A monitoring system detects a leak,fails to operate,or is electrically disconnected? If yes:w�hich sensors initiate <br /> positive shut-down? (Check all that apply]-p Sump/Trench Sensors; ❑Dispenser Containment Sensors. <br /> Did you confirm positive shut-dowri due to leaks and'sensor failure/disconnection? ❑Yes;, ❑No. <br /> ❑ Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfillwarning device (i.e., no <br /> ❑ N/A mechanical overfill prevention valve is installed), is the,9verfilfwarning alarm visible and audible at the tank <br /> fill point(s)and operating properly? If so,at what percent of tank capacity does the alarm trigger? % <br /> ❑ Yes* ❑ No Was any monitoring equipment replaced? If yes,identify specific sensors,probes,or other equipment replaced <br /> and list the manufacturer name and model for all replacement.parts in Section E,,below. <br /> ❑ Yes* ❑ No Was liquid found inside any'secondarycontainment systems,designed as dry systems? (Check all that apply) <br /> ❑ Product; ❑ Waters If yes,describe,causes in Section E,below. <br /> ❑ Yes ❑ No* Was monitoring system set-up reviewed to ensure,proper settings?Attach set up reports,if applicable <br /> ❑ Yes ❑ No* Is all monitoring equipment operational per manufacturer's specifications? <br /> * In Section E below,describe how and when these deficiencies Wein or will be,corrected. <br /> E. Comments: � <br />