COMPLIANCE INFO 2008 - 2011 - Laserfiche WebLink

Home Browse Search

Test Method Developed By: Page 2 of 8 2. UNDER -DISPENSER CONTAINMENT (UDC) TESTING ❑ Sump Manufacturer © Industry Standard ❑ Other (Specify) ❑ Other (Specify) ❑ Professional Engineer 11 Test Equipment Used: INCON STS I Equipment Resolution: +/- 0.002" Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) * Test was done for post repair work testing; not an actual SB -989 Test. ** UDC 3/4 was tested on 05/01/2008 *** UDC 1/2, 5/6, 7/8 were tested on 05/15/2008 ' If the entire depth of the UDC is not tested, specify how much was tested. If the answer to M of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -160) uDC # 1/2 UDC # 3/4 UDC # 5/6 UDC # 7/8 UDC Manufacturer: Unknown Unknown Unknown Unknown UDC Material: Poly Poly Poly Poly UDC Depth: 28" 28" 28" 28" Height from UDC Bottom to Top of Highest Piping Penetration: 10" 10" 10" 10" Height from UDC Bottom to Lowest Electrical Penetration: 4" 4" 4" 4" Condition of UDC prior to testing: Dry Dry Dry Dry Portion of UDC Tested' 2" Above Penetration 2" Above Penetration 2" Above Penetration 2" Above Penetration Does turbine shut down when UDC sensor detects liquid (both product and water?' ❑ Yes ❑ NO ® NA ❑ Yes ❑ No ❑x NA ❑ Yes ❑ No ❑O NA ❑ Yes ❑ No ® NA Turbine shutdown response time N/A N/A N/A N/A Is system programmed for fail-safe shutdown?' ❑ Yes ❑ No O NA ❑ Yes ❑ No ❑x NA ❑ Yes ❑ No ❑x NA ❑ Yes ❑ No O NA Was fail-safe verified to be operational?* ❑ Yes ❑ No IM NA ❑ Yes ❑ No ❑x NA ❑ Yes ❑ No IM NA ❑ Yes ❑ No ® NA Wait time between applying pressure/vacuum/water and starting test 10 min 10 min 10 min 10 min Test Start Time: 12:39 PM 2:36 PM 02:06 PM 12:39 PM Initial Reading (Ri): 5.216" 0.444" 4.980" 5.048" Test End Time: 12:54 PM 2:51 PM 02:21 PM 12:54 PM Final Reading RF): 5.216" 0.444" 4.967" 5.048" Test Duration: 15 min 15 min 15 min 15 min Change in Reading (RF-Ri): 0.000" 0.000" -0.013" 0.000" Pass/Fail Threshold or Criteria Test Result: +/- 0.002" 21 Pass ❑ Fail +/- 0.002" ❑O Pass ❑ Fail +!- 0.002" ❑ Pass 21 Fail +/- 0.002" 10 Pass ❑ Fail Was sensor removed for testing? O Yes ❑ No ❑ NA El Yes ❑ No ❑ NA O Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA Was sensor properly replaced after testing? px Yes ❑ No ❑ NA IM Yes ❑ No ❑ NA O Yes ❑ No ❑ NA ® Yes ❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) * Test was done for post repair work testing; not an actual SB -989 Test. ** UDC 3/4 was tested on 05/01/2008 *** UDC 1/2, 5/6, 7/8 were tested on 05/15/2008 ' If the entire depth of the UDC is not tested, specify how much was tested. If the answer to M of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -160)