Laserfiche WebLink
SAFETY DATA SHEET <br /> Jet A Aviation Fuel <br /> Version 2.2 Revision Date 2016-05-17 <br /> varies vanes <br /> Immediately Dangerous to Life or Health Concentrations (IDLH) <br /> Substance name CAS-No. Control parameters Update <br /> Naphthalene 91-20-3 Immediately Dangerous to Life or Health 1995-03-01 <br /> Concentration Value <br /> 250 ppm <br /> Engineering measures <br /> Adequate ventilation to control airborned concentrations below the exposure guidelines/limits. <br /> Consider the potential hazards of this material (see Section 2), applicable exposure limits,job <br /> activities, and other substances in the work place when designing engineering controls and selecting <br /> personal protective equipment. If engineering controls or work practices are not adequate to prevent <br /> exposure to harmful levels of this material,the personal protective equipment listed below is <br /> recommended. The user should read and understand all instructions and limitations supplied with <br /> the equipment since protection is usually provided for a limited time or under certain circumstances. <br /> Personal protective equipment <br /> Respiratory protection Wear a supplied-air NIOSH approved respirator unless <br /> ventilation or other engineering controls are adequate to <br /> maintain minimal oxygen content of 19.5%by volume under <br /> normal atmospheric pressure. Wear a NIOSH approved <br /> respirator that provides protection when working with this <br /> material if exposure to harmful levels of airborne material may <br /> occur,such as:. Air-Purifying Respirator for Organic Vapors. <br /> Use a positive pressure, air-supplying respirator if there is <br /> potential for uncontrolled release, exposure levels are not <br /> known, or other circumstances where air-purifying respirators <br /> may not provide adequate protection. <br /> Hand protection The suitability for a specific workplace should be discussed <br /> with the producers of the protective gloves. Please observe <br /> the instructions regarding permeability and breakthrough time <br /> which are provided by the supplier of the gloves.Also take into <br /> consideration the specific local conditions under which the <br /> product is used, such as the danger of cuts, abrasion, and the <br /> contact time. Gloves should be discarded and replaced if there <br /> is any indication of degradation or chemical breakthrough. <br /> Eye protection Eye wash bottle with pure water. Tightly fitting safety goggles. <br /> Skin and body protection Choose body protection in relation to its type, to the <br /> concentration and amount of dangerous substances, and to the <br /> specific work-place. Wear as appropriate:. Flame retardant <br /> antistatic protective clothing. Workers should wear antistatic <br /> footwear. <br /> Hygiene measures When using do not eat or drink. When using do not smoke. <br /> Wash hands before breaks and at the end of workday. <br /> SECTION 9: Physical and chemical properties <br /> Information on basic physical and chemical properties <br /> Appearance <br /> Form Liquid <br /> Physical state Liquid <br /> SDS Number:100000014588 6/15 <br />