Laserfiche WebLink
0 <br />DATA QUALIFIERS <br />1] <br />B - Indicates the compound was found in the blank and the sample. <br />E - Concentrations exceed calibration range of the instrument. <br />I - Indicates Interference. <br />J - Indicates an estimated value for either a TIC or an analyte that meets the <br />identification criteria but the result is less than the specified reporting limit. <br />T - Indicates the compound was found in the TCLP extraction blank and the sample. <br />u - Indicates an inorganic compound was analyzed for but not detected. <br />U - Indicates an organic compound was analyzed for but not detected. <br />BS - Indicates matrix analyses were conducted on reagent grade water. <br />BSD- Blank Spike Duplicate <br />BDL- Below Detection Limit <br />D - Indicates that surrogate/matrix spike recoveries were not obtained because the <br />extract had to be diluted for analysis. <br />DL - Indicates a secondary dilution <br />DF - Dilution factor <br />LCS- Laboratory Control Sample <br />MB - Method Blank <br />MS - Matrix Spike <br />MSD- Matrix Spike Duplicate <br />NA - Not Applicable <br />X - Result is by calculation <br />NS - Not Spiked `Result was outside advisory limits. <br />