COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006 (WT BEZEMA TUI3IWAS14 SKP Version 2.3 Revision Date 24.07.2014 Print Date 25.07.2014 Solids with occupational exposure limits in liquid preparations do not cause an exposure in the work- place, because they are not present in a respirable form. Exposure can occur In the form of aerosols or after drying of the liquid the solids remain, possibly in a finely dispersed form. Provide sufficient air exchange and/or exhaust in work rooms. Personal protective equipment Respiratory protection In case the work place is not ventilated sufficiently and during spray processing, it Is necessary to wear respiratory protective equipment. Recommended Filter type: Combination filter A/P Hand protection Nitrile rubber Protective index Class 6 Break through time: > 480 min Glove thickness: > 0,35 mm butyl -rubber Protective index Class 6 Break through time: > 480 min Glove thickness: > 0,5 mm Fluorinated rubber Protective index Class 6 Break through time: > 480 min Glove thickness: > 0,4 mm The obtained break through times according to EN 374 Part III are not measured under normal operating conditions. There- fore a maximum usage time of 50% of the break through time is recommended. The choice of an appropriate glove does not only depend on Its material but also on other quality features and is different from one producer to the other. Eye protection Wear eye/face protection. Skin and body protection Wear suitable protective clothing. Hygiene measures Avoid contact with skin, eyes and clothing. Do not breathe vapours, aerosols. Take off all contaminated clothing immediately. Handle in accordance with good industrial hygiene and safety practice. Environmental exposure controls General advice : The product should not be allowed to enter drains, water 9/17