Laserfiche WebLink
BORMri <br />CH <br />b. Get the power, press the button of the motor, check and adjust rotated direction of the <br />motor, from the right direction of the motor, the rotated direction is clockwise. <br />c. View and listen to the sound of the motor and the pump running, if it is abnormal ,you <br />should immediately stop power supply, then check the fault. <br />d. If the machine is used with thetransport supports (such as a stick, some models have) <br />then the rotary selector switch to "manual" position, press the "return" switch to make the <br />tank up, then remove the transport added supports. <br />e. First unload test, the rotary selector switch to "manual" position, press and hold the <br />button pressed the slider up and down foot.3-5 times in order to drain the air in the system, then <br />turn the selector switch to the "semi-automatic" file, click the button pressed within a <br />predetermined range limit switch upper and lower motor several times until the slider uniform <br />rise or fall. Normal use, the pressure can be adjusted to 11-15Mpa. (Pressure testing method is <br />described in Chapter). Required before the machine working so thatthe machine in the load - <br />load operation for at least 15 minutes. <br />f. load test, check all fittings for leaks and sealing parts, carefully check the accuracy of <br />the host. <br />g. trial after the absence of any situation in which the trial ended, can be delivered. <br />28.1.8fE&W: BUTTON DESCRIPTION <br />O 1POWERI BACK <br />iff7�/t /- IR <br />OPEN Self auto/ ack/manual PRESS <br />STOP <br />