Laserfiche WebLink
BORETE <br />E <br />CH <br />motion, return automatically after 2 seconds until the rear limit switch, plate stop, the motor is <br />stopped after 10 seconds, enter standby mode. <br />c. pressure reaches the set value and the platen met before the trip switch, enters packaged <br />state. <br />d. package is complete, click the button to open the door, the front door open, and then <br />start the motor, press the return button.automatic feeding machine, pushed forward the packet <br />after packet way to lay a package introduced machines. <br />e. the package away, shut the door, press the close button more than 1 second .the door <br />closed. <br />f. the machine stop at the rearmost end plate for about 10 seconds the motor stops <br />automatically. <br />g. pressing the emergency stop button on the machine will stop all movements. <br />2 8. 2 IT, <br />I SYSTEM REGULATION, SETTING AND <br />PRECAUTIONS <br />3A4TFVJ44*-W- CA, <br />The machine factory that before packing according to your size requirements were set up, <br />If you do not need to change, you do not have to re -set pressure. However, in order to prevent <br />changes caused during shipping, so it is recommended that you should make checks before <br />working. <br />'f7'Nff Limit switch settings <br />Limit switch is adjusted properly, do not adjust. <br />AFkA.VUE, )J* -W Hydraulic system pressure setting <br />AfBU A !� o <br />Pressure has been adjusted, do not adjust it again. <br />113 <br />