Laserfiche WebLink
BOR 1 E <br />CH <br />(3) It is low temperature as the winter, sothe oilviscosity is high, you may start the machine <br />before working, and the motor is running for some time (5-10min), then the <br />temperature rise, and so you can work. <br />(4) Do not make pressure above the maximum working pressure of the machine, in order <br />to prevent causing the machinepermanent damage and even endanger the safety of the <br />operator. <br />(5) You should not adjust electrically controlled system by yourself and remove the <br />hydraulic components without permission. <br />(6) When High-pressure hose pipe has oil to leakor spills, you need to replace this. <br />28.4T SAFETY PROCEDURES <br />(2) *rte IIID <br />(5) ft54!2$1Jngft, <br />(6) AtfAZVLT, <br />(7) <br />Ahri <br />(9)���kl'J1iJS;r• <br />(10) "IFM)�_Flf ! <br />(1) The machine is in operation, it is strictly prohibited head, hands or person's entire <br />body into the sliderbelow <br />(2) Pressure cylinder piston rod is strictly prohibited to bottom <br />(3) When feeding please push itby an auxiliary tool <br />(4) Regardless of whether the machine is working, you can not drilled into the lower part of <br />the slider <br />(5) Electrical control, electrical control box Internal is prohibited for non-professional <br />inspection and making changes to the line <br />(6) It is prohibited for non-professionals to open electrical box when it is working <br />(7) Please check regularly bolts of slider flange mounting (at least one year for it ) to <br />preventloosing <br />(8) If you found the cylinder, the piston rod, tubing cracks in working, you should <br />immediately stop using it and promptly notify maintenance personnel to check <br />and keep in repair it. <br />(9) It is prohibited to use in the open air. <br />118 <br />