Laserfiche WebLink
API 653 Out-of-Service Inspection Report <br /> for <br /> J.R. Simplot Inspection <br /> Tank No. 8 August 27-28,2008 <br /> Lathrop, CA Page 20 of 54 <br /> 4.4 NOZZLES AND APPURTENANCES <br /> 4.4.1 NOZZLE AND APPURTENANCE INSPECTION CHECKLIST <br /> J # DESCRIPTION I COMMENTS <br /> Y 1 Inspect for signs of corrosion or other defects Reference Section 2.0 <br /> around all manways, nozzles, and <br /> attachments. <br /> Y 2 Inspect for flange leaks and leaks around bolts. None found, Acceptable <br /> Y 3 Check piping and valves for leaks, thermal Reference Section 2.0 <br /> relief, or signs of damage. <br /> Y. 4 Inspect condition of stairway ladder and Reference Section 2.0 <br /> platform. <br /> N 5 Check welds on shell mounted davit clips NIA <br /> above large valves orequipment. <br /> Y 6 Describe and verify operability of gauging Electronic Sensor System & <br /> devices, if applicable. Level Indicator Board <br /> N 7 1Inspect mixer for support, leakage, and NIA <br /> defects. <br /> Y 8 1Check for adequate reinforcement around Acceptable <br /> nozzles and appurtenances. <br /> Y 9 Verify adequate weld spacing around nozzles Reference Section 2.0 <br /> and appurtenances. <br /> N 10 Check floating suction for damage and proper NIA <br /> support. Check condition of shell mounted <br /> angle limiting brackets or angle limiting chains <br /> mounted to bottom. <br /> APIRPTNE.DOT REV 2 26280304f8r.doc 9/2512008 10:09 AHF <br />