Laserfiche WebLink
UNIFIED PROGRAM CONSOLIDATED FORM <br /> ONSITE TIERED PERMITTING <br /> CONDITIONALLY EXEMPT-LIMITED (CEL) PAGE <br /> WASTE AND TREATMENT PROCESS COMBINATIONS <br /> (One page per treatment unit. Check all that apply) <br /> 606. �. <br /> UNIT ID# 1 Facility ID# Page _I_ of 1 <br /> 631. <br /> ❑ 1. Puncturing, draining, or crushing of aerosol cans, at ambient temperature, using equipment or technology combination <br /> certified by the Department of Toxic Substances control (DTSC) pursuant to section 25200.1.5 of the Health and Safety <br /> Code. The equipment must capture gaseous and liquid contents, prevent fire, explosion, and unauthorized releases of <br /> hazardous constituents,and prevent worker exposure. The aerosol cans must be recycled as scrap metal. <br /> Certified Technology Number: <br /> NOTE: This category is not available until DTSC certifies a manufacturer's equipment. <br /> 2. The separation of used oil from water, provided that the wastestream is hazardous solely due to the oil and the used oil is <br /> properly transported to an authorized offsite oil recycler. Treatment using: <br /> ® a. Gravity separation. <br /> ❑ b. A centrifuge. <br /> ❑ <br /> C. A membrane technology. <br /> ❑ d Heating of the water containing used oil to a temperature that is not more than 20 degrees Fahrenheit below the flashpoint <br /> of the used oil component of the mixture at atmospheric pressure. <br /> ❑ e. The addition of demulsifiers to the water containing used oil. <br /> NOTE: The authorized separation of used oil from water under this wastestream may not include <br /> contaminated groundwater or water containing Pny measurable amounts ofgasoline or more than <br /> two percent(2%) diesel fuel(combination of Number 1 or 2 fuel). <br />