Laserfiche WebLink
UNIFIED PROGRAM CONSOLIDATED FORM <br /> ONSITE TIERED PERMITTING <br /> CONDITIONALLY EXEMPT -LIMITED (CEL) PAGE <br /> WASTE AND TREATMENT PROCESS COMBINATIONS <br /> One page ver treatment unit. Check all that apply) <br /> 606. l' <br /> UNIT ID# Facility 5LO33 Page _ of <br /> 531. <br /> ✓d 1. Puncturing, draining, or crushing of aerosol cans, at ambient temperature, using equipment or technology combination <br /> certified by the Department of Toxic Substances control(DTSC) pursuant to section 252001.1.5 of the Health and Safety <br /> Code. The equipment must capture gaseous and liquid contents, prevent fire, explosion, and unauthorized releases of <br /> hazardous constituents,and prevent worker exposure. The aerosol cans must be recycled as scrap metal. <br /> Certified Technology Number: <br /> NOTE: This category is not available until DISC certifies a manufacturer's equipment. <br /> 2. The separation of used oil from water,provided that the wastestream is hazardous solely due to the oil and the used oil is <br /> properly transported to an authorized offsite oil recycler. Treatment using: <br /> ❑ a. Gravity separation. <br /> ❑ b. A centrifuge. <br /> ❑ <br /> C. A membrane technology. <br /> © d Heating of the water containing used oil to a temperature that is not more than 20 degrees Fahrenheit below the flashpoint <br /> of the used oil component of the mixture at atmospheric pressure. <br /> ❑ e. The addition ofdemulsifiers to the water containing used oil. <br /> NOTE: The authorized separation of used oil from water under this wastestream may not include <br /> contaminated groundwater or water containing gnX measurable amounts of gasoline or more than <br /> two percent(2%)diesel fire!(combination of Number I or 2 fuel). <br /> UPCF hwfcel(1194)-112 <br /> www.unidocs.org Rev.0510$100 <br />