Laserfiche WebLink
Health and Safety Plan <br />Underground Tank Program <br />Tank Removal or <br />Over -Excavation Resample <br />INTRODUCTION <br />PURPOSE AND SCOPE <br />The Health and Safety Plan, for underground tank removal/over-excavation provides for the <br />protection of on-site personnel and the surrounding community during site characterization activities. <br />The requirements, specifications and procedures presented with the plan will apply to all personnel <br />on-site, including employees, subcontractors, site visitors and regulatory agency personnel. <br />HAZARD ANALYSIS <br />The most significant risk associated with petroleum contaminated soil is exposure to aromatic <br />compounds. Skin contact will be eliminated by use of clothing, eye wear, and gloves and the <br />inhalation hazard will be minimized using appropriate respiratory protective devices as determined by <br />on-site air monitoring. The Safety Coordinator/Project Manager will establish an exclusion zone <br />encompassing a 50 -foot radius from the work area. Access Within this zone will be limited to <br />required personnel. Total organic vapors will be monitored within the exclusion zone using a <br />photoionization detector (PID) calibrated for benzene, the most toxic of the aromatic hydrocarbons. <br />Current enforceable and recommended exposure limitations for potential site contaminants are <br />presented in Table 1. <br />PERSONAL PROTECTIVE EQUIPMENT <br />A minimum of U.S. EPA level D protection will be required within the exclusion zone for any <br />workers engaged in sample collection or other activities on this site. Level D protection will include: <br />• Disposable Tyvek coverall (when in contact with contaminated material) <br />• Boots with steel toe <br />• Splash goggles or safety glasses <br />• Chemical resistant disposal gloves (when in contact with contaminated material) <br />Level C protection will be required if PID readings exceeding 10 ppm over background <br />concentration are recorded in the workers' breathing zone. Level C protection will consist of: <br />• Disposable Tyvek coverall <br />• Boots with steel toe <br />• Chemical resistant boot covers <br />• Chemical resistant disposal gloves (inner) <br />• Chemical resistant outer gloves <br />• MSHA/NIOSH approved half -mask air -purifying respirator with dual organic vapor <br />cartridges <br />PID readings exceeding 250 ppm in the workers' breathing zone will require work stoppage <br />and site evacuation. An explosion -proof fan may be used to vent the work area. <br />