Laserfiche WebLink
D. Results of Testing/ServidA . <br /> r <br /> Software Version Installed: 2—S z- <br /> J <br /> Complete the following checklist: <br /> Yes ❑ No* Is the audible alarm operational? <br /> Yes ❑ No* Is the visual alarm operational? <br /> Yes ❑ No* Were all sensors visually inspected, functionally tested, and confirmed operational? <br /> Yes ❑ No* Were all sensors installed at lowf.st point of secondary containment and positioned so that other equipment will <br /> not interfere with their proper operation? <br /> Ll Yes 11No* If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. modem) <br /> NIA operational? <br /> Yes ❑ No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment <br /> ❑ NIA monitoring system detects a leak, fails to oper te, or is electrically disconnected? If yes: which sensors initiate <br /> positive shut-down? (Check all that apply)�Sump/Trench Sensors; ADispenser Containment Sensors. <br /> Did you confirm positive shut-down due to lea s and sensor failure/disconnection? Yes; 13 No. <br /> ❑ Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfll warning device (i.e, no <br /> N/A mechanical overfill prevention valve is installed), is the overfill warning alarm visible and audible at the tank <br /> fill point(s) and operating properly? If so, at what percent of tank capacity does the alarm trigger? % <br /> ❑ Yes* No Was any monitoring equipment replaced? If yes, identify specific sensors,probes, or other equipmen#replaced <br /> and list the manufacturer name and model for all replacement parts in Section E, below. <br /> Cl Yes* No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that app1j) <br /> ❑ Product; ❑ Water. If yes, describe causes.in Section E,below. <br /> Yes ❑ No* Was monitoring system set-up reviewed to ensure proper settings?-Attach set up reports,if applicable <br /> Yes ❑ No* Is all monitoring equipment operational per manufacturer's specifications? <br /> *In Section E below, describe how and when these dericiencies were or will be corrected, <br /> E. Comments: <br /> 4 <br />