Laserfiche WebLink
SWRCB,January 2002 Page of <br /> a. SECONDARY PIPE TESTING <br /> Test Method Developed By: X Piping Manufacturer Industry Standard Ll Professional Engineer <br /> ❑Other(Spec) <br /> Test Method Used: X Pressure I Vacuum ❑Hydrostatic <br /> ❑Other(Spec) <br /> Test Equipment Used:Pressure Gauges in Psi/Nitrogen Equipment Resolution: 1/10-15 Psi <br /> r. <br /> Piping Run#1 Piping Run# Piping Run# Piping Run# <br /> Piping Material: Poly Plastic <br /> Piping Manufacturer: Environ-Geo Flex <br /> Piping Diameter: 3" <br /> Length of Piping Run: Approx. 6' <br /> Product Stored: Jet A <br /> Method and location of Test boot at STP#1 <br /> piping-run isolation: <br /> Wait time between applying 15 Minutes <br /> -pressure and starting test: <br /> Test Start Time: 2:00 <br /> Initial Reading(R[): 5 Psi <br /> Test End Time: 3:00 <br /> Final Reading(RF): 5 Psi <br /> Test Duration: I Hour <br /> Change in Reading(RF-Ri): 0 Psi <br /> Pass/Fail Threshold or <br /> No Loss in Psi <br /> Criteria: <br /> Test Result: X Pass [] Fail ❑ Pass ❑ Fail D Pass ❑Fail ❑ Pass D Faii <br /> Comments—(include in ormation on repairs made prior to testing, and recommended ollow-u or ailed tests <br /> Piping Run#1,Tested after replacement of Test Seal off Boot at STP Sump#1. Not Tested on original Test Date of 2/4/12. <br /> 5. <br />