COMPLIANCE INFO 1999-2007 - Laserfiche WebLink

Home Browse Search

D. Results of Testing/Servicin. • ` Software Version Installed: / 7 .d Complete the following checklist: IFCJ Yes ❑ No* Is the audible alarm operational? EI-Yes ❑ No* Is the visual alarm operational? Y,ps ❑ No* Were all sensors visually inspected, functionally tested, and confirmed operational? Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned Ither equipment will not interfere with their proper operation? ❑ Yes ❑ No* If alarms are relayed to a remote monitoring station, is all communicationsent (e.g. modem) ❑�A operational? ET Yes ❑ No* For pressurized piping systems, does the turbine automatically shut down if the pipingndary containment ❑ N/A monitoring system detects a leak, fails to operate, or is electrically disconne ed,,Tln sensors initiatepositive shut-down? (Check all that apply) GrSuump/Trench Sensors; ment Sensors.Did you confirm positive shut-down due to leaks and sensor failure/disconnection? ❑No.❑ Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfing device (i.e. no0-91/A mechanical overfill prevention valve is installed), is the overfill warning alarm visiaudible at the tank_ fill point(s)and operating properly? If so,at what percent of tank capacity does the agger? ❑ Yes* Ef No Was any monitoring equipment replaced? If yes, identify specific sensors,probes, or other equipment replaced _ and list the manufacturer name and model for all replacement parts in Section E, below. ❑ Yes* El No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that appl)) ❑Product; ❑Water. If yes, describe causes.in Section E,below. ❑ Yes ❑ No* Was monitoring system set-up reviewed to ensure proper settings?Attach set up reports,if applicable ❑ Yes ❑ No* Is all monitoring equipment operational per manufacturer's specifications? *In Section E below, describe how and when these deficiencies were or will be corrected. E. Comments: