Laserfiche WebLink
MODEL 1527 IPEATHERPROOI TANK QAUGE <br /> INSTALLATION INSTRUCTION <br /> 1 . with the gauge lying horizontally you W1 : • : .unt cuver of the <br /> tank gauge has 5 screws install�c ;.r . -rows and remov( <br /> front cover from back pan. Do not t _:. aer cr r plug on tube <br /> fittings at top of back pan. <br /> Z • remove the small <br /> pieces of v:. : :r r.ir:d from the Blas; <br /> column. <br /> 3. Reinstall the front cover using a: : ;ras prs• _ded. Insure that <br /> screws are snug only to insure a water-t .j:.t seal . <br /> 4. Install gauge in a vertical positiur. seg : e:y to a wall, pole or tank, <br /> etc. using 4 mounting holes. <br /> 8 . Install tank assembly unit in tank an.! tubir.g to gauge, but do not <br /> attach at this time. ( see bulletin 1 '[ 1606 packed with tank <br /> assembly) . NOTE: Do not use type unions to splice <br /> additional lengths of tubing. <br /> 6. Looking down at the top of the gauge, ora;;p aerator and turn counter <br /> clockwise until the pump springs ul . DO NOT PUSH PUMP DOWN UNTIL <br /> TUBING TO TANK ASSE/IDLY IS CONNECTED. <br /> 7. Remove plug from tubing connect.iun at top right hand side of <br /> gauge. Install tubing using the cczpreL;sicn nut provided. Tighten <br /> enough to provide an air tight seal ! t1.e nut is in the black back <br /> board at the top holding the yellow ir;stru.tion tagi . <br /> - 1 - <br />