Laserfiche WebLink
0 0 <br /> Encore Shipping Weight and Model Codes: N-X-X Introduction <br /> Encore Shipping Weight and Model Codes: N-X-X <br /> Shipping Weights <br /> The shipping weight for a standard Encore dispenser is approximately 800 lbs. (363 kg). <br /> Additional shipping weight is added when options are included.The following table provides <br /> shipping weights for the dispenser and applicable option(s). <br /> Equipment Weight Weight <br /> Dispenser 850 lbs. 386 kg <br /> Ultra-Hi-(dual) 730 lbs. 331 kg <br /> VaporVac°option 2001bs.(additional) 91 kg(additional) <br /> Pumping Unit option 60 Ibs.(per grade) 27 kg(per grade) <br /> DEF Dispenser only 860 lbs. 390 kg <br /> Model Codes <br /> While new models have their serial number and model plate located inside the Electronics <br /> Cabinet,in older units,they are located at the bottom of the dispenser directly above the serial <br /> number.The model number is a two-letter and one-numeric digit model code stamped onto the <br /> Model/Serial plate.This code shows the configuration of the Encore unit. <br /> For example,a serial plate stamp with model code"NG2"signifies that the unit is an Encore <br /> Single-hose 3-grade Pump where: <br /> N=represents an Encore unit <br /> G=represents a single-hose <br /> 2=represents a 3-grade Pump+ I <br /> To determine the model code on a Gilbarco dispenser,refer to the following tables. <br /> Note: Not all model types are available in an Encore 5001500 S or Encore 300 Series. <br /> MDE-39858 Encore®Installation Manual,dwre 2010 Page 3 <br />