COMPLIANCE INFO 2007-2012 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page of_ 6. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard X Professional Engineer ❑Other(Specify) Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Spec6) Test Equipment Used:Caldwell Level Change Indicator Equipment Resolution: .002 Sump# I Sump#2 Sump#3 Sump# Sump Diameter: 44" 44" 44" Sump Depth: 39" 39" 37%s" Sump Material: Fiberglass Fiberglass Fiberglass Height from Tank Top to Top of 19" 18" 12" Highest Piping Penetration: Height from Tank Top to Lowest 11" 23" 22" Electrical Penetration: Condition of sump prior to testing: Dry Dry Dry Portion of Sump Tested' Water Line 25" Water Line 25" Water Line 24" Does turbine shut down when sump sensor detects liquid(both X Yes ❑No ❑NA X Yes ❑No [INA X Yes ❑No ❑NA ❑Yes ❑No ❑NA product and water)?. Turbine shutdown response time Not Alarmed Not Alarmed Not Alarmed Is system programmed for fail-safe shutdown?* X Yes 11No ❑NA X Yes ❑No 11NA X Yes ❑No ❑NA ElYes ElNo ❑NA Was fail-safe verified to be operational?* Yes X No ❑NA Yes X No 11NA Yes X No ❑NA 11Yes ❑No 11NA Wait time between applying water 5 Minutes 5 Minutes 5 Minutes and starting test: Test Start Time: 11:25 11:30 12:15 Initial Reading(111): .001 .001 .001 Test End Time: 11:55 12:00 12:45 Final Reading(RF): .001 .001 .001 Test Duration: 30 Minutes 30 Minutes 30 Minutes Change in Reading(RF-Ri): 0 0 0 Pass/Fail Threshold or Criteria: .005/30 Minutes .005/30 Minutes .005/30 Minutes Test Result: X Pass ❑Fail X Pass ❑Fail X Pass ❑Fail - ❑ Pass ❑Fail Was sensor removed for testing? X Yes ❑No ❑NA X Yes ❑No ❑NA X Yes ❑No DNA ❑Yes ❑No ❑NA W as sensor properly replaced and functional after testing? X Yes ❑No ❑NA X Yes ❑No ❑NA X Yes ❑No ❑NA ❑Yes ❑No 11 NA verified Com 111ents—(include information on repairs made prior to testing, and recommended follow-up for failed tests) If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)