Laserfiche WebLink
�. ..i <br /> • Relocate upwind and upgradient of the spilled material <br /> `- • Take air, soil, or appropriate samples to determine if clean-up is complete <br /> 3.18.1 Solid Materials Spills <br /> In the event of a spill or release of a solid, Geofon will remove and place contaminated <br /> materials into a dry container with a cover. The container will be appropriately labeled and <br /> disposed of as soon as possible. <br /> 3.18.2 Liquid Material Spills <br /> Liquid spills will be adsorbed with sand or other appropriate absorbent material. The <br /> absorbent material will be incorporated into the contaminated stockpiled soil. The final <br /> disposition of the absorbent material will be determined in conjunction with the stockpiled soil. <br /> In the event of a discharge of liquid into the soil, Geofon will immediately identify the <br /> location of the discharge and take appropriate remedial actions to eliminate further spillage. The <br /> discharged liquid material will be controlled and disposed of as described above. If a reported <br /> discharge of any materials stored in drums, baker tanks, vacuum trucks, etc. occurs, the <br /> following steps shall be followed: <br /> • Notify the Contracting Officer and the Regional Water Quality Control Board <br /> • Contain and eliminate the discharge(if not prevented by safety considerations) <br /> • Remove/retrieve any discharged liquids (if not prevented by safety considerations) <br /> • Isolate the spill area restricting access to unauthorized personnel <br /> • Decontaminate the spill area, if necessary <br /> • Prepare a spill report <br /> The Spill Report will contain the following: <br /> • Description of the material spilled including identity, quantity, and a copy of the <br /> waste manifest. Identify the cause of the spill. <br /> �- • Exact time and location of the spill, and a description of the area involved. <br /> 25 <br />