Laserfiche WebLink
Exposure to these hazards will be minimized by using safe work practices and personnel protective <br /> equipment such as steel toe, steel shank boots, etc. <br /> SECTION 4.0 PROTECTIVE EQUIPMENT <br /> 4.1 PERSONAL PROTECTION <br /> Level D protective gear will be used on site. The proper equipment for this level includes: <br /> 1. Gloves <br /> 2. Hard hat; <br /> 3. Boots- inner, steel-toed and shank, neoprene; <br /> 4. Protective coveralls or work pants with long sleeve shirt <br /> 5. Safety glasses or safety goggles. <br /> SECTION5.0 WORKZONES <br /> The work zones will be determined by the Project Manager and the Site Safety Officer before the start of <br /> operations. The three zone system will be employed. i.e. exclusion zone, contamination reduction zone, and <br /> support area. <br /> SECTION 6.0 DECONTAMINATION PROCEDURES <br /> Personnel equipment worn into the Contamination Zone will be decontaminated by laundering. <br /> Equipment will have gross soil scraped off and placed with other soil taken from excavations. If gross <br /> contamination is present revisions to this section may be required. <br /> SECTION 7.0 GENERAL PROJECT SAFETY REQUIREMENTS <br /> 7.1 GENERAL SAFETY <br /> All personnel shall avoid contact with potentially contaminated substances or surfaces. Kneeling on the <br /> ground or leaning against objects should be avoided whenever possible. Equipment shall not be placed on <br /> potentially contaminated surfaces. Eating, drinking, smoking, chewing of gum and tobacco, and application of <br /> cosmetics shall be restricted to the break areas only. Personnel must remain alert to any potential hazards <br /> such as slippery surfaces, overhead lines, faulty equipment and tripping. All personnel on site will be required <br /> to wash their face and hands after working in a contaminated or potentially contaminated area. <br />