Laserfiche WebLink
FROM . - • • <br /> piping Sump Sensor <br /> • When the sensor detects liquid, it sends an alarm <br /> • signal to the TLS console monitor, where both <br /> • visual and audible built-in alarm indicators immedi- <br /> > ately identify the location of the problem.You can <br /> then quickly take action to help prevent serious <br /> safety and environmental problems. <br /> For even greater warning capability,the TLS-350R, <br /> TLS-350, ILS-350,TLS-300i,TLS-2501 and ILS-250 <br /> feature internal alarm relays that can also trigger <br /> on-site alarms. With the TLS-350R,TLS-350 and <br /> TLS-300i, alarm signals from the sump sensor <br /> trigger a leak report showing the time and location <br /> of the alarm condition.The information is stored in <br /> the system's Alarm History and can be printed on <br /> the monitor's integral printer, or retrieval remotely <br /> through its data communications interface. <br /> Positive Alarm Indication of any Simple to Install <br /> Liquid in Underground Fuel Storage The Veeder-Root Piping Sump Sensor can be used <br /> Tank Piping Sumps in the piping sumps of either steel or fiberglass <br /> tanks. Each sensor comes with complete hardware <br /> P. For TLS-350R, TLS-350, ILS-350, TLS-3001, for mounting on existing conduit or piping. Only two <br /> TLS-2501 and ILS-250 UST Monitoring wires are required to connect the sensor to a TLS <br /> Systems. or ILS system. <br /> ► System Indicators Pinpoint Alarm <br /> Location. <br /> ► Simple to Install. <br /> ► Two-wire Connection to System Monitor. <br /> Standard Components <br /> ► Complete with All Mounting Hardware. On, DESCRIPTION <br /> 1 Piping Sump Sensor Assembly <br /> Fast Action Helps Prevent Serious Safety and 2 Mounting Strips <br /> Environmental Problems <br /> 1 Watertight Cord Grip <br /> • The Veeder-Root Piping Sump Sensor detects the 3 Screws for mounting <br /> presence of liquid in a UST piping sump. Liquid <br /> presence could mean a dangerous line leak. <br />