COMPLIANCE INFO 2013-2015 - Laserfiche WebLink

Home Browse Search

• • ECEIVEL Facility Name: Costco # 038 Stockton (Page 2) MAR 17 2015 D. Results of Testing/Servicing Complete the following checklist: Software Version Installed: 333.04 (-SFA 724!1170n 214 r-h- ®Yes ❑ No* Is the audible alarm operational? ®Yes ❑ No* Is the visual alarm operational? ®Yes ❑ No* Is the print function operational? ®Yes ❑ No* Were all sensors visually inspected, functionally tested, and confirmed operational? ®Yes ❑ No* Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with their proper operation? ®Yes ❑ No* If alarms are relayed to a remote monitoring station, is all communications equipment (e.g. ❑ N/A modem) operational? ®Yes ❑ No* For pressurized piping systems, does the turbine automatically shut down if the piping secondary ❑ N/A containment monitoring system detects a leak, fails to operate, or is electrically disconnected? If yes: which sensors initiate positive shutdown? (Check all that apply) ® Sump Sensors; Dispenser Containment Sensors. Did you confirm positive shutdown due to leaks and sensor failure/disconnection? ®Yes; ❑ No. ®Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device, is ❑ N/A the overfill warning alarm visible and audible at the tank fill point(s) and operating properly? At what percent of tank capacity does the alarm trigger? 90% ®Yes* ❑ No Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced and list the manufacturer name and model for all replacement parts in Section E, below. ®Yes* ❑ No Was liquid found inside any secondary containment systems designed as dry systems? (Check all thatappl )® Product; ❑ Water. If yes, describe causes in Section E, below. ®Yes ❑ No* Was monitoring system set-up reviewed to ensure proper settings? Attach set up reports, if applicable ®Yes ❑ No* Is all monitoring equipment operational per manufacturer's specifications? 1. Comments: Replaced the sl additive product line liquid float with a like for like sensor. Retested fine. There was a small amount of fuel at the bottom of dispenser 7/8 from a recent filter change. There were no signs of leaks under the dispenser. Fuel was removed and placed in barrel onsite.