Laserfiche WebLink
UST SYSTEM PRINTSET INFORMATION <br /> 1. Four complete sets of plans (To include specification sheets and/or equipment brochures if not on file). <br /> 2. Plans drawn to scale in non-erasable print. <br /> 3. Plot plan to show location and number of tanks. <br /> 4. K Tank cross-sectional diagram included on prints submitted. <br /> 5. X Detail of tank, piping system, excavation and cover. <br /> 6. X Tank(s) and piping approved by a nationally recognized independent testing organization. [Title 23, Subchapter 16, <br /> �J/ Article 3, Sec. 2631 (r) 8 2635] <br /> 7. ^ verification of product compatibility with the tank(s), piping, monitoring <br /> device(s), epoxy or silicone glues, etc. [Section 2635 (b) (2)1 <br /> 8. �/ Manufacturer-s written installation instructions for tank(s), piping, monitoring devices, etc. [Section 2635 (b) (5)1 <br /> 9. Tightness Test (NFPA 30) is required on both primary (10) and secondary (20) containment systems before covering. <br /> [Section 2635 (b) (6) 8 (7)] <br /> 10. X Double walled tanks using pressure or vacuum testing to monitor the annular space. [Section 2635 (b) (7)1 <br /> 11. NFPA 329 "Precision Test" required upon completion of installation with tank in operating condition. Test results to <br /> be submitted directly to PNS/EHD from the testing company or owner of facility. [Health 8 Safety Code, Division 20, <br /> Chapter 6.7, Section 25291 (g)] <br /> 12. TANK COMPOSITION <br /> L <br /> # A # #Y 1TURERITION (JL/C)r all V/`,ION PROTECTION 7�ISTED t-7s L�IBILITY WITH 100% LYT's <br /> OL <br /> 13. TANK(s) TO BE INSTALLED <br /> N A. Steel-clad with fiberglass reinforced plastic. <br /> B. Holiday test required immediately before "setting" tank(s) (35,000 - 40,000 volts). [Section 2635 (b) (4)1 <br /> C. Fiberglass [Sections 2635 (3) and 2631 (p)1 <br /> _ (1) Striker plate dimensions and materials. <br /> (2) Striker plate under all accessible openings. <br /> X (3) Installation instructions require an air test and soap bubble test prior to installation. <br /> N D. Non-clad steel tank [Section 2635 (b)1 <br /> (1) Cathodic protection provided for entire tank, piping and components (rests, bolts, washers, <br /> etc.). <br /> _ (2) Approved by a corrosion engineer or N.A.C.E. technician. <br /> (3) Document stating inspection method and frequency (minimum seri-anrwaL inspection requirement). <br /> 4 <br />