COMPLIANCE INFO 2002 - 2007 - Laserfiche WebLink

Home Browse Search

3. Pi in Leak Detection Monitorin E ui t Monitoring Method t»en Manufacturer Model Manitortin Fre uenc �I Sump leak sensors connected to continuous monitoring system Veeder Root 794380-208 Specify type: containment ❑ Discriminating Continuous Continuous criminatin 794380-208 onic Mechanical line leak detectors with PElecO.N rogrammed leak threshold of threeEvery allons er hour ❑ Discriminating pumping cycle tronic line leak detectors with Red Jacket CPTrogrammed leak threshold of ❑ 0.1 h Every pumping cycle 02 h �3 h ❑ Daily El Line integrity testing by: © Other. ❑ Electronic line leak detector is ❑ Other (specify): equipped to conduct line tightness ❑ Annually testing Third party testing Other Not re wired ❑ Other (Specify): 4. Dispenser Leak Detection Monito ^na E ui ment MonitorPn Method Manufacturer Modet 1 Moriftring Frequency ❑ Mechanical float in dispenser containment Continuous Electronic leak sensor in dispenser Veeder Root 794380-208 containment: ❑ Discriminating Continuous 0 Non -discriminating ❑ Visual inspection ❑ Daily © Other. No under-dis enser containment ❑ Other (specify): o. rostnve snucaown c:a Automatic pump shut off will occur whenever: ® Release is sensed in turbine sump ® Release is sensed in primary piping ® Release is sensed at dispenser ® Monitoring system is disconnected or fails in any way (fail safe) ❑ Other (specify): 6. Secondary Containment Testin Secondary containment is not tested In the State of Califomia, secondary containment systems installed on or after January 1. 2001, shall be tested upon installation. six months after installation, and every 36 months thereafter. Secondary containment systems installed prior to January 1. 2001. shall be tested by January 1. 2003, and every 36 months thereafter. T. Annual Equipment CertificationFresting ® Annually ❑ Other (specify): 2