INSTALL_2014 B100 - Laserfiche WebLink

Home Browse Search

18.5.5. Before each tank filling,owner/operator or the delivery • Two-Part Sealant Mixing/Handling Instructions service must determine the tank's reduced capacity due to the �f3 • Watertight Cover Gasket Replacement Instructions overfill protection,then consult the instructions or guidelines provided by the installer and manufacturer of the overfill-pro- Wet Well Installation Instructions and Operating Guidelines. - tection device to determine how much additional product the 20.1.1.2.Among those materials available from technical sup- tank can hold. port at Xerxes Minneapolis,MN, are the following: 18.5.6. Owner/operator must ensure that the fill line and drop Alternate Backfill(Sand)Installation Instructions tube are adequately grounded to prevent static discharge dur- ing filling. • Cast-in-Place Deadmen Installation 18.5.7. Initial fill rate should be controlled to limit the possibil- • Deep Burial Installation Guidelines. ity of product sloshing. 21. RETENTION OF INSTALLATION MANUAL 19. LIMITED WARRANTIES 21.1. GENERAL 19.1. GENERAL 21.1.1.After installation,tank installer must give the Installa- 19.1.1. Each product is covered by a product-specific limited tion Manual and the completed Tank Installation Checklist to warranty,which contains operating guidelines and parameters the tank owner. that should be reviewed as applicable.A copy of the applica- 21.1.2.After installation,tank owner must retain the Installation his Xerxes limited warranty is found in the printed material that Manual for future reference to operating guidelines.Tank owner accompanies each tank, in applicable product brochures and must also retain a copy of the Tank Installation Checklist. at www.xerxes.com, It is also available upon request from the _ Xerxes customer service coordinator. 20. SUPPLEMENTAL MATERIALS 20.1. GENERAL 20.1.1. Supplemental materials,which may apply to specific installations and/or conditions,are available upon request from the Xerxes customer service coordinator or from techni- cal support at Xerxes Minneapolis,MN. Most supplemental materials are also available at www.xerxes.com. 20.1.1.1.Among those materials available from the Xerxes customer service coordinator and at www.xerxes.com are the _ following: • Diesel Exhaust Fluid(DEF)Tank Installation Instructions - • Double-Wall Containment Sump Installation Instructions • Field Fiberglass Lay-Up Instructions for Containment Sumps - • Flexible Dipstick Monitoring Instructions • Large Bottom Sump Installation Instructions • Man-Out-of-Hole(MOH)Strap Instructions • New York City Double-Wall Tank Installation/Testing Supplement • Prefabricated Deadmen Installation Instructions • Preinstallation Testing Instructions for Water/Wastewater Tanks Factory-Equipped for Pressure Testing • Primary Backfill Requirements • TRUCHEK®Brochure • Single-Wall Containment Sump Installation Instructions - for Flat-Sided Containment Sumps • Single-Wall Containment Sump Installation Instructions for Round-Sided Containment Sumps • Split Backfill Instructions - • Triple-Wall Tank Preinstallation Testing Instructions 26