Laserfiche WebLink
Performance Primary operating pressures to 300 psi(20 bar) <br /> Continuous operating temperature to 150°F(66°C) <br /> Containment system pressures to 50 psi(3,45 bar) <br /> Individual system components may not have the same ratings as the pipe.Refer to the <br /> detailed product information for the specific components to determine the pressure rating <br /> forthe system as a whole. <br /> Composition Primary pipe:Filament-wound fiberglass reinforced epoxy pipe with integral epoxy liner <br /> and exterior coating.When classified in accordance with ASTM D2310 and ASTM <br /> D2996,the pipe meets the following cell limits:RTRP 11 CX-5430. <br /> Pipe containment:Filament-wound fiberglass reinforced epoxy pipe, <br /> Interstitial space:Dry,graded glass beads secured in place with adhesive backed tape. <br /> Fittings:Compression molded or filament-wound fiberglass reinforced epoxy primary <br /> fittings.Containment fittings are molded- <br /> Adhesive.Ameron PSX"-20 or PSX'-34 ambient-cure,two-part epoxy for all services <br /> (including alcohols and MTBE). <br /> Prima Belfand spigot ta ----- <br /> Joining system Primary; perltaparadhesive-bonded joint <br /> Containment:Adhesive-bonded clamshell fittings.Parts are compression molded for <br /> exact tit and match. Material is identical to primary fittings and is fully Listed by UL for all <br /> services,including use in MTBE fluids. <br /> Pipe lengths Standard 20 ft.(6.1 m)random lengths 17 to 21 ff.(5.2to6A m) <br /> and 30 ft.(9.1 m)random lengths 27 to 32 ft.(8.2 to 9.7 m) <br /> Other lengths up to 42 ft.available upon request. <br /> Primary— Ada ters_bell x NPT male Flange stub ends <br /> Fittings p 9 <br /> g Adapters:bell x NPT female2 Isolation bushings' <br /> Adapters-spigotxNPTfemale2 Nipples2 <br /> Adapters:spigot NPT male2 Reducer bushings' <br /> 45°alhows' Repair couplings' <br /> 90°elbows' Sleeve couplings2 <br /> End caps' Tees' <br /> Flange rings' Dispenser pan penetration fittings' <br /> Containment— 45°elbows' Couplings' <br /> 90°elbows' Tees' <br /> Termination sleeves" <br /> 1 Moldedfitting <br /> 2 Filarnent•Woundfitting <br /> 3 2-inch available With arwilhouttesivatve.3-and 4-inch available only with test valve <br /> 2 <br />