Laserfiche WebLink
0IMPORTANT SAFETY MESSAGES <br /> FE Petro equipment is designed to pump volatile hydrocarbon liquids such as gasoline and diesel fuel. <br /> Installing or working on this equipment means working in an environment in which these highly flammable <br /> liquids are present. This presents a risk of severe inmury or death if these instructions and standard <br /> industpractices are not followed. Read and follow this entire instruction booklet before <br /> installing or working on this equipment. <br /> As you read these instructions, watch for the following safety symbols: <br /> WARNING <br /> This symbol identifies a potentially hazardous situation, which if the instructions that follow it are not <br /> adhered to, could result in death or serious bodily injury. <br /> CAUTION <br /> This symbol identifies a potentially hazardous situation, which if the instructions that follow it are not <br /> adhered to, could result in serious property damage, including possible environmental contamination as a <br /> result of the leakage of fuel from the equipment. <br /> NATE <br /> This symbol identifies particular instructions, which if not followed, could cause serious damage to the <br /> equipment or lead to equipment failure. <br /> WARNING <br /> Highly flammable vapors may be present in the environment in which this equipment is being installed or <br /> serviced. Do not smoke while working on or near this equipment. Use only non-sparking tools. Failure to <br /> follow this instruction could result in serious fire or explosion. <br /> WARNING <br /> Many submersible pumps are now housed in containment sumps designed to trap hazardous liquid spills and <br /> prevent contamination of the environment. These containment sumps can also trap dangerous quantities of <br /> hydrocarbon vapors which, if inhaled, could lead to dizziness and fainting, or, if ignited, could result in an <br /> explosion causing serious personal injury or death. Before working in or entering a containment sump, <br /> always check for the presence of hydrocarbon vapors inside. If found to be unsafe, ventilate the sump with <br /> fresh air, then re-check the atmosphere in the sump before doing the work and periodically thereafter. <br /> ALWAYS have a second person standing by for assistance when working in or around a containment sump. <br /> WARNING <br /> Follow all federal, state, and local laws governing the installation of this product and the entire system. When <br /> no other regulations apply, follow NFPA 30, 30A, and 70 from the National Fire Protection Association. <br /> Failure to do so could result in severe injury, death, serious property damage and/or environmental <br /> contamination. <br /> WARNING <br /> If the electrical circuit breakers are accidentally turned on while the pump is being installed or serviced, <br /> electrical power could be applied to the pump, creating the risk of a potentially lethal electrical shock hazard <br /> and the possibility of a spark which could ignite any hydrocarbon vapors present during installation and <br /> result in an explosion or fire. ALWAYS tag and lock out breakers so they are not turned on accidentally. <br /> 2 <br />