Laserfiche WebLink
r.. ..0 <br /> ATTACHMENT A <br /> FIELD AND LABORATORY PROCEDURES <br /> Soil Sampling <br /> Soil samples were collected by advancing 2-inch-diameter brass sample liners into <br /> undisturbed soil, or soil removed from an excavation by a backhoe bucket. Soil samples <br /> for chemical analysis were retained in the brass liners, labeled, and capped with Teflon <br /> sheets and plastic end caps. The samples were then sealed in zip-lock bags, placed on ice, <br /> and transported to the laboratory accompanied by the appropriate chain-of-custody <br /> documentation. <br /> Soil Sampling for Stockpiled Soil <br /> Soil samples were collected by advancing 2-inch diameter brass sample liners into the soil <br /> stockpile, after removing approximately 6 inches to 1 foot of surface material in the <br /> sample location. One composite sample (four sleeves to 1 sample) was collected per <br /> approximately 75 cubic yards of soil. Soil samples for chemical analysis were retained in <br /> the brass liners, labeled, and capped with Teflon sheets and plastic end caps. The samples <br /> were then sealed in zip-lock bags, placed on ice, and transported to the laboratory <br /> accompanied by the appropriate chain-of-custody documentation. <br /> Laboratory Analysis of Soil Samples <br /> Analysis for TPH-g, benzene, toluene, ethylbenzene, xylenes (BTEX compounds), and <br /> MtBE was performed by EPA Method 8015/8020. Analysis for Fuel Oxygenates (MtBE, <br /> EtBE, DIPE, TBA, TAME, and 1,2-DCA) was performed by EPA Method 8260. <br /> Analysis for Total Metals was performed using EPA method 6010A. <br /> 077.41741.500/PU9,LDOC A-1 September 16,1999 <br />