Laserfiche WebLink
Veeder-Root Sensor Application Guide <br /> Sump Sensor <br /> The sensor is installed in a tank piping sump and will detect the presence of a liquid. Liquid level is monitored by a <br /> float/magnetic reed switch sensing system. <br /> Sensor Detection Capabilities - Alarm Conditions <br /> Fuel alarm is triggered when liquid reaches a nominal height of 1-inch. <br /> Operating Capabilities <br /> • Operating temperature range: 0 to+60°C. <br /> • Storage temperature range: -40 to+70°C. <br /> • Sensor dimensions: 12" high, 1.9" diameter. <br /> SensorlCable Length Configurations <br /> • Sump Sensor wl 12 foot cable - Form Number 794380-208 <br /> • Sump Sensor wl 30 foot cable - Form Number 794380-209 <br /> Sensor Interface Module <br /> • TLS-350 Series Consoles(except TLS-350J)-Interstitial Sensor Interface Module(Form Number 847490-102) <br /> accepts up to 8 sensors (a maximum of 64 sensors could be monitored by the console). <br /> • TLS-350J Console-3 sensors max. <br /> • <br /> TLS-300/PC-300 Series Consoles(no Interface Module required) -8 sensors max. <br /> • ILS-350 Console-A Two-Wire Module(Form Number 845190-100)accepts up to 4 sensors (a maximum of 16 <br /> sensors could be monitored by the console). <br /> Console Software Compatibility <br /> • Version 1 or later (TLS-350 SeriesFFLS-300 Consoles) <br /> • All ILS-350 Consoles <br /> Compatible Fuels -- <br /> • Unleaded gasoline ® ° ° ` _E=xisting conduit <br /> • Leaded gasoline • or piping t <br /> • Diesel _ <br /> Product <br /> Kerosene 'o <br /> Cable to iu; ' � pipe <br /> • Jet fue4 <br /> Gable to junction boxf box and seal-off <br /> • Aviation gasoline and sea!-off <br /> • 5% methanol/95%unleaded <br /> • 15%ethanol/85% unleaded k <br /> • 15% MTBE/85% unleaded <br /> 'Sump sensor should: �. <br /> 1.Rest on the base of the sump. <br /> Related Sales Literature 2.Be positioned as close to outer Sump sensor` <br /> wall as possible. <br /> Visit our website at www.veeder.com 3.Be mounted in a true vertical (installation examples) <br /> for more information on VeedeC-Root s4,Be installed only in a dry sump. <br /> products and services. ,sump base <br /> rF#" <br /> Fig.2 Typical <br /> i Sensor installation <br /> 5 <br />