Laserfiche WebLink
D. Results of TestinglServicing AUG 14 2617 <br /> Software Version Installed: 327.04 <br /> Complete the followinq checklist: <br /> V yes-F---N 0. Is the audible alarm operational? <br /> le Yes ❑ No' Is the visual alarm operational? <br /> ® Yes 7 No" Were all sensors visually inspected,functionally tested,and confirmed operational? <br /> P Yes J No' Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with their <br /> ro er operation? <br /> 0 Yes ❑ No' If alarms are relayed to a remote monitoring station,is all communications equipment(e.g.modem)operational? <br /> 0 NIA <br /> A Yes ❑ No' For pressurized piping systems, does the turbine automatically shut down if the piping secondary containment monitoring system <br /> ❑ N/A detects a leak,fails to operate,or is electrically disconnected? If yes:which sensors initiate positive shut-down? (Check all that apply) <br /> V SumpiTrench Sensors; ✓ Dispenser Containment Sensors. Did you confirm positive shut-down due to leaks and sensor <br /> failureldisconnection? ❑+ Yes; No. <br /> 0 Yes ❑ No' For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e, no mechanical overfill prevention <br /> ❑ NIA valve is installed),is the overfill warning alarm visible and audible at the tank fill point(s)and operating properly? If so,at what percent <br /> of tank capacity does the alarm tri er? 90 % <br /> ❑ Yes' 7 No Was any monitoring equipment replaced? If yes, identify specific sensors, probes, or other equipment replaced and list the <br /> manufacturer name and model for all replacement parts in Section F,below. <br /> 2 Yes' 7 No Was liquid found inside any secondary containment systems designed as dry systems? (Check all that apply)❑ Product; ❑Water. If <br /> es,describe causes in Section E,below. <br /> 2 Yes ❑ No' Was monitoring system set-up reviewed to ensure proper settings?Attach set up reports,if applicable <br /> a Yes ❑ No' I Is all monitoring equipment operational per manufacturer's specifications? <br /> In Section E below,describe how and when these deficiencies were or will be corrected. <br /> E. Comments: <br /> Monitoring System Certification Page 2 of 4 12107 <br /> 2 2/21107 <br />