Laserfiche WebLink
0 <br />0 <br />Oil Spill Prevention Control Et Countermeasure (SPCC) <br />SLIDE 17 <br />SECONDARY CONTAINMENT- <br />Dike/Curbing <br />Review your SPCC Plan, identify <br />where and what type of secondary <br />containment (berms, dikes, <br />curbing) is used at the facility. Be <br />prepared to point out the location <br />of secondary containment on the <br />site map during the training <br />session. <br />Include in the notes box below <br />any site specific BMP's that are <br />not already included in the "What <br />to Say and Do" section. <br />Notes: <br />LEADER GUIDE <br />Secondary Containment is used to PREVENT <br />leak or spill from reaching a storm drain or <br />waterway. All tanks and drums must have <br />secondary containment. <br />Reference the site map and point out to the <br />participants where berms, dikes and/or <br />curbing are used at your facility. <br />It is important to... <br />• Keep all storm water discharge valves closed <br />• Remove accumulated rainwater from <br />contained areas and manage as wastewater if <br />there is any contamination <br />• Clean-up spills/leaks in the containment <br />• Keep containment areas free of debris and <br />deep rooted plants <br />• Do not store equipment or parts within the <br />containment area <br />• Report any cracks, holes or heavy erosion in <br />the containment <br />Talk about the site specific secondary <br />containment BMPs included in the notes box <br />below. <br />RECEIVE <br />OCT 0 7 2313 <br />ENIVIRONMEN' <br />HEALTH DEPARTM v, <br />SPCC -version 1.2 P a g e 115 <br />