REMOVAL 1990 CLOSURE IN PLACE - Laserfiche WebLink

Home Browse Search

Names of collectors 1 - Dates and times of collection Purpose of sample _ - Sample distribution (e.g. , laboratory, archive, etc. ) - Field observations Field measurements (e.g. , PID readings, pH, conductivity, water levels) . Other data records (e.g. development log, soil sampling report, well log, etc. ) Procedures for surface soil collection from shallow test pits are discussed in the appended Soil Sampling Protocol . Soil samples will be collected using decontaminated equipment and placed in laboratory prepared containers. All drilling equipment, pipe, and materials coming in contact with the borehole material will be decontaminated before use according to the procedures described in Section 6.0. All sampling equipment will be decontaminated prior to sampling following these same procedures. Soil samples will be collected as monitoring well drilling progresses . All downhole drilling equipment will be decontaminated prior to use and between use for each well according to the procedures described in Section 6.0. All well construction material, including well casing, screen, and well caps, will be decontaminated prior to installation by steam cleaning according to the procedures described in Section 6.0. To prevent the transfer of surface contamination to a well, a Portland cement and bentonite surface seal will be installed in conformance with regulatory requirements. The casing will be fitted with a water tight locking cap. No solvent or glue will be used in well construction. The wellhead will be contained below grade in a water-tight traffic rated box or otherwise protected from damage. In order to assure that groundwater samples are obtained from formation material and not from the filter pack, wells will be purged in accordance with the appended Well Development Protocol. Samples will be placed in laboratory prepared containers, appropriate for the analyses specified as indicated on Table 1.