Laserfiche WebLink
Supplemental Documents - Conversion Formulas <br /> ALL TANK COLLARS AND SUMPS: Q. CONVERSION FORMULAS <br /> • Must be continuously monitored for leaks using an <br /> electronic leak monitoring sensor. Use this as a guide if a dimension does not have a <br /> • Must be isolated from direct traffic loading metric conversion printed. <br /> (see Figure P-1). <br /> LENGTH WEIGHT <br /> Single and Double-wall Tank Sump Installation <br /> Instructions are available(see Supplemental Documents, mm =millimeters kg= kilogram <br /> Section R). • I"=25.4 mm • 1 Ib= 0.454 kg <br /> COLLAR TEST INSTRUCTIONS • 1'= 304.8 mm CAPACITY <br /> • The installation contractor must leak test the tank PRESSURE L=liters <br /> sump to the secondary containment collar joint and kPa=kilopascals 1 gal= 3.785 L <br /> the secondary containment collar to tank attachment . 1 psi=6.894 kPa <br /> before backfill is around the collar. <br /> • Test the joints by filling the sump with water at least DOCUMENTSSUPPLEMENTAL <br /> 2"to 3"above the tank sump to the secondary <br /> containment collar joint. Record the liquid level.After Supplemental documents, which may apply to specific <br /> 24 hours, re-measure and record the liquid level. installations and/or conditions, are available upon <br /> A liquid level change of more than /."indicates a request from Containment Solutions Technical Support. <br /> passible leak(see Figure P-2). <br /> Figure P-2 • Single-Wall Tank Sump Installation Instructions <br /> (Pub. No. INST 6030) <br /> t A r �► <br /> .%4 Concrete Slab • Double-Wall Tank Sump Installation Instructions <br /> (Pub. No. INST 6034) <br /> • Deadman Anchors and Turnbuckles <br /> (Pub. No.ACC 5002) <br /> Standing Tank Sump • Deadman Layout by Tank Size(Pub. No. TNK 1062) <br /> �v Water Test • Split Strap Anchor System (Pub. No. INST 5004) <br /> Secondary • Wire Rope over Tank Top(Pub. No. INST 6047) <br /> Tank Containment . Urea DEF Supplemental Installation Instructions <br /> Manway Collar (Pub. No. INST 6052) <br /> • Initial Jobsite Testing • Double-Wall Tanks Shipped with Vacuum Monitored <br /> - The installation contractor must leak test this collar Annular Space(Pub. No. INST 6050) <br /> and sump before the tank installation is complete. • Alternate Backfill Above Tank Top Installation <br /> • Future Testing Instructions(Pub. No. INST 6014) <br /> - Tank owner/operator must leak test the collar and • Lifting Tanks with Slings(Pub. No. 6021) <br /> sump after any damage, repairs or modifications. . NYC Special Installation Instructions <br /> • For double wall collars, see additional instructions for (Pub. No. INST 6008) <br /> testing the outer wall (refer to INST 6034 Double-Wall - Fiberglass Oil/Water Separator Tank Installation <br /> Tank Sump Installation Instructions). and Start-Up Instructions(Pub. No. OWS 2013) <br /> ACCESS RISERS(NON PETROLEUM TANKS) • Brine Monitoring Fluid MSDS Sheet(Pub. No. 15002) <br /> Access Riser Installation Instructions are available, refer • Berm Installation Instructions(Pub. No.6022) <br /> to Supplemental Documents, Section R. • Water Tank Supplemental Installation Instructions <br /> (Pub. No. INST 6038) <br /> • Triple-Wall Tank Supplemental Installation <br /> Instructions(Pub. No. INST 6045) <br /> • Fiberglass Tanks Shipping into Canada Supplemental <br /> Installation Instructions(Pub. No. INST 6043-CAN) <br /> • Bottom Sump Installation Instructions <br /> (Pub. No. INST 6044) <br /> - Access Riser Installation Instructions w/Adhesive <br /> Channels(Pub. No. INST 6056) <br /> 25 <br />