Laserfiche WebLink
' r • • <br /> San Joaquin County DIRECTOR <br /> Donna Heran,REHS <br /> Department Environmental Health Dep <br /> r ASSISTANT DIRECTOR <br /> 600 East Main Street Laurie Cotulla,REHS <br /> X Stockton, California 95202-3029 PROGRAM COORDINATORS <br /> Carl Borgman, RENS <br /> c .. c <br /> ov.or /ehd Mike Huggins,REHS,RDI <br /> Website: www.5 <br /> q�iFpR`�` 18 9 Margaret Lagorio,REHS <br /> Phone: (209) 468-3420 Robert McClellon,REHS <br /> Fax: (209) 464-0138 Jeff Carruesco,REHS,RDI <br /> Kasey Foley,REHS <br /> January 21, 2009 <br /> Joseph Bagley Sent by mail <br /> Bagley Enterprises, Inc. <br /> 2370 Maggio Circle, Suite 4 <br /> Lodi, CA 95240 <br /> RE: Morada Chevron, 10878 N Highway 99, Stockton (SR0056305) <br /> The San Joaquin County Environmental Health Department(EHD)has completed the <br /> review of the application for a permit to rewire the diesel sump liquid sensor at the above <br /> noted address. The sensor was rewired during the monitoring system certification on <br /> January 12, 2008 and passed the functionality test. The permit has been approved with <br /> the following conditions: <br /> 1. Contact the local fire department and the San Joaquin Valley Air Pollution <br /> Control District for any applicable permits and requirements. <br /> 2. A"Certification of Installation/Modification" form shall be submitted by the <br /> owner or the owners' agent [pursuant to (CCR)2635(d)] before this repair will be <br /> considered complete by the EHD. <br /> 3. Qualified service technicians must possess or work under the direct and personal <br /> supervision of an individual physically present at the work site who possesses all <br /> of the following: <br /> a. One of several permissible valid, current contractor's licenses issued by <br /> the Contractors State License Board (may be issued to the installation <br /> company), and <br /> b. A valid, current California UST Service Technician certificate issued by <br /> the International Code Council (ICC), and <br /> c. A valid, current certificate of training from the manufacturer(s) of the <br /> component(s)being tested, repaired, or serviced, and <br /> d. Each person installing or testing any component must hold a certificate of <br /> training from the manufacturer of that component. <br /> 4. Permit expires 180 days from date of approval. Note: If an extension to the <br /> expiration date is required, a written request must be submitted to this office prior <br /> to the expiration date. <br /> Page 1 of 2 <br />