Laserfiche WebLink
DualoyFO ProductData <br /> Fittings Dimensions in <br /> 2 through 6-inch Sizes <br /> for Dualoy 3000/L piping systems <br /> Units All dimensions are in U.S.Customary units(inches). <br /> Diametric dimensions are maximums. <br /> Insertion depths(Xi,X2)are typical. <br /> All weights(Ib)are approximate. <br /> Tolerances Tolerance for centerline-to-face dimensions on fittings with bell-end <br /> configuration is±1/16 inch. <br /> Listings Dualoy 3000/1-is Listed in the U.S.with Underwriters Laboratories for nonmetallic <br /> underground piping for petroleum products,alcohols(such as methanol and ethanol) <br /> and alcohol-gasoline mixtures(File MHg162). Dualoy 3000/1-pipe and fittings are <br /> OUnderwriters U UL L� also listed with Underwriters Laboratories of Canada for petroleum products and Laboratories Inca 4 oxygenated fuels(File CMH 715), in the Netherlands with KIWA(Ref.ATA no. <br /> 2062/1-E), in Sweden with AS Statens Anlaggningsprovning(Certificate SA 1-1- <br /> 9846)and with the French Ministry of the Environment(Arrete 261 bis). In Great <br /> Britain the Dualoy 3000/1-system has been tested and accepted by the London Fire <br /> and Civil Defence Authority. <br /> End configurations Bell end is standard. <br /> Taper angle The taper angle on all bell and spigot end configurations is 13/a°. <br /> Pressure ratings See Ameron publication DUALOY 3000/1-FIBERGLASS PIPE AND FITTINGS, FP265,for <br /> pressure ratings. <br /> Individual system components may not have the same ratings as the pipe. <br /> Refer to the detailed product information for the specific components to <br /> determine the pressure rating for the system as a whole. <br /> Manufacturing methods The fiberglass-reinforced epoxy resin fittings shown in this document are <br /> manufactured by filament winding or compression molding. <br /> Adapters: bell x NPT female Flange rings <br /> Adapters:bell x NPT male Flange stub ends <br /> Adapters:isolation Nipples <br /> Adapters:spigot x NPT female Reducer bushings <br /> Adapters:spigot x NPT male Repair couplings <br /> 45° Elbows Sleeve couplings <br /> 90° Elbows Sump penetration pieces <br /> End caps Tees <br /> FP266C (10/94) <br />