Laserfiche WebLink
we <br /> Veeder-Root Sensor Appd'eation Guide <br /> Position-Sensitive Sensor <br /> The sensor is installed in a pan/sump and incorporates a float switch to detect water and/or hydrocarbons. The <br /> sensor also alarms if it is moved off the bottom of the pan/sump. <br /> Sensor Detection Capabilities - Alarm Conditions <br /> • Fuel alarm is triggered when liquid reaches a nominal height of 1-1/2 inches. <br /> • Sensor Out alarm is triggered when sensor is moved off bottom of the pan/sump. <br /> Operating Capabilities <br /> • Operating temperature range: 0 to +60°C. <br /> • Storage temperature range: -40 to +70°C. <br /> Sensor dimensions: 12" high, 2.2"diameter. <br /> Sensor/Cable Length Configurations <br /> • Position-Sensitive Sensor w/ 12 foot cable -Form Number 794380-323 <br /> Sensor Interface Module <br /> • TLS-350 Series Consoles(except TLS-350J) - Interstitial/Liquid Sensor Interface Module (P/N 329358-001) <br /> accepts up to 8 sensors(a maximum of 64 sensors could be monitored by the console). <br /> • TLS-350J Console -3 sensors max. <br /> • TLS-300/PC-300 Series Consoles(no Interface Module required) - 8 sensors max. <br /> • ILS-350 Console-A Two-Wire Module (P/N 329675-001)accepts up to 4 sensors (a maximum of 16 sensors <br /> could be monitored by the console). <br /> Console Software Compatibility <br /> • Version 1 or later(TLS-350 Series/TLS-300 Consoles) <br /> • All ILS-350 Consoles <br /> Compatible Fuels <br /> • Unleaded gasoline <br /> • Unleaded with up to 5%methanol, <br /> 85%ethanol, or 15%MTBE <br /> • Leaded gasoline <br /> Submersible <br /> • Diesel pump Sensori Cord grip Weatherproof <br /> • Kerosene i �1 �junction box <br /> • Jet fuel <br /> • Aviation gasoline Containment sump `� --Seal-off <br /> — � � i <br /> Related Sales Literature ,1 j { conduitgid <br /> i 1 <br /> Visit our website at www.veedeccom � to console <br /> for more information on Veeder-Root „ , • , _Brackets,clamp,etc. <br /> products and services. e - from optional universal <br /> sensor mounting kit <br /> — Product line <br /> waMaWwr•..n <br /> IMPORTANT!Housing must compress <br /> � position indicator against bottom of the <br /> sump or you will have a'Sensor Out'alarm. :rc __Correct <br /> Fig.4 Typical Position-Sensltive Sensor Installation <br /> 7 <br />