COMPLIANCE INFO 2004 - 2007 - Laserfiche WebLink

Home Browse Search

r r r r SWRCB, January 2002 Iwo 4. PIPING SUMP TESTING Page _ of Test Method Developed By: Sump Manufacturer Industry Standard Professional Engineer X Other (Specify) SWRCB Test Method Used: Pressure Vacuum X Hydrostatic Other (3pecify) Test Equipment Used: INCON SUMP TESTING MONITOR SYSTEM Sump #JUNK OIL Sump # Equipment Resolution: Sump # Sump # Sump Diameter: 42" Sump Depth: 117' Sump Material: FIBERGLASS Height from Tank Top to Top of Highest Piping Penetration: 24„ Height from Tank Top to Lowest Electrical Penetration: 37" Condition of sump prior to testing: FAIR Portion of Sump Tested' BOTTOM 39" Does turbine shut down when sump sensor detects liquid (both product and water)? Yes No x NA Yes No NA Yes No NA Yes No NA Turbine shutdown response time N/A Is system programmed for fail-safe shutdown? Yes No x NA Yes No NA Yes No NA Yes No NA Was fail-safe verified to be operational? Yes No x NA Yes No NA Yes No NA Yes No NA Wait time between applying pressure/vacuum/water and starting test: 30 MINUTES Test Start Time: 1318 Initial Reading (R,): 6.9565 Test End Time: 1333 Final Reading (RF): 6.9555 Test Duration: 15 MINJ2 TESTS Change in Reading (RF -R,): -0.0010 Pass/Fail Threshold or Criteria: +/-0.002 Test Result: X Pass ❑ Fail ❑ Pass ❑ Fail 0 Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? x Yes No NA Yes No NA Yes No NA Yes No NA Was sensor properly replaced and verified functional after testing? x Yes No NA Yes No NA Yes No NA Yes No NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)