Laserfiche WebLink
VEEDER-ROOT <br /> Micro Sensor <br /> For Liquid Sensing in Tight Locations <br /> Veeder-Root's MicroSensor detects the presence <br /> of fluid In tight locations around your storage <br /> tanks. Ideal for use in contained risers and the <br /> Interstitial space of double-wall steel tanks, the <br /> ' versatile MlcroSensor can also be used in the <br /> interstitial space of aboveground tanks, and any <br /> other area as small as 1" diameter. <br /> The MlcroSensor's stiff, durable cable can easily <br /> be pushed into its appropriate sensing area. No <br /> pull-card or special tools are necessary for installation. The solid-state, <br /> durable sensor construction means no moving parts to wear out or stick, <br /> assuring accurate and reliable sensing. MiroSensor even withstands Icy <br /> conditions. <br /> Alarm conditions - Fuel and Sensor Out - detected by the MicroSensor are <br /> indicated by an audible alarm, a displayed message on the TLS-35OR or TLS- <br /> 350 console, and a printed message if the console is equipped with a <br /> printer. The alarms are also recorded as part of the TLS-350R or TLS-350 <br /> Alarm History Report. <br /> The MicroSensor is easily removed, cleaned, and reinstalled if an alarm is <br /> triggered or for periodic testing. <br /> Features <br /> • The presence of any liquid in the sensing location triggers a Fuel Alarm <br /> • An open sensor triggers a Sensor Out Alarm <br /> Temperature Rating <br /> Storage: -40 degrees C to + 70 degrees C <br /> Operating: -32 degrees C to +55 degrees C <br /> Rests in salt brine solution of up to 30% calcium chloride <br /> Cable length: 25 feet <br /> Dimensions: 0.75" wide, 0.38" high, 2.15" long <br /> Withstands removal and replacement from sensing area without sensor <br /> damage <br /> Standard Models <br /> Console Series <br /> TLS-35OR 8482 <br /> TLS-350 8470 <br /> Type A Interface Module, Farm No. 847490-105, required for use of <br /> MicroSensors with TLS-350R and TLS-350 consoles. <br />