Laserfiche WebLink
0 0 <br /> �u <br /> Vapor Sensor <br /> For TLS-350R, TLS-350 and ILS-350 <br /> Veeder-Root's Vapor Sensor detects the presence of <br /> hydrocarbon vapors in a dry monitoring well which <br /> could mean a dangerous leak When vapors are <br /> detected that exceed a programmed threshold, the <br /> sensor sends a signal to a TLS-350R-TLS-350.or ILS- <br /> 350 console. The monitor's visual and audible built-in <br /> alarm indicators immediately tell you where the problem is, so you can <br /> quickly take action to prevent serious safety and environmental problems. <br /> Veeder-Root Vapor Sensor can be used in dry monitoring wells. Only three <br /> wires are required to connect the sensor to a TLS-350R. TLS-350 or ILS-350 <br /> system. <br /> Features <br /> • Hydrocarbon vapor exceeding the programmed <br /> threshold triggers a Fuel Alarm <br /> • Liquid present in the monitoring wells triggers a <br /> Water Alarm <br /> • Withstands removal and replacement from <br /> monitoring well without sensor damage <br /> Temperature Rating <br /> Storage:-40 degrees C to +75 degrees C <br /> Operating: -20 degrees C to +70 degrees C <br /> Dimensions: 4.88" long, 1.06 diameter <br /> Power Requirements: Intrinsically safe power supplied by Veeder-Root TLS- <br /> 350R, TLS-350 or ILS-350 system <br /> Standard Models <br /> Form No. Description <br /> 794390-700 Vapor Sensor for Monitoring Wells <br /> Vapor Sensor Console Capability <br /> The Series 7943 Vapor Sensor is compatible with the following consoles: <br /> Console Series <br /> TLS-350R* 8482 <br /> TLS-350" 8570 <br /> ILS-350** 8450 <br /> *A Vapor Sensor Interface Module is required for use of the Vapor Sensor <br /> with the TLS-35OR or TLS-350 console. <br /> **A Three-Wire Module is required for use of the Vapor Sensor with the ILS- <br /> 350 console. <br />