Laserfiche WebLink
Secondary <br /> SensingVacuum System <br /> Quickly and accurately detects leaks <br /> while preventing the release of . : <br /> product into the environment <br /> Y <br /> Veeder-Root's Secondary Containment <br /> Vacuum Sensing System for use with <br /> Veeder-Root ATG systems. The Feahrres <br /> Secondary Containment Vacuum Sensing <br /> (SCVS) system is designed to detect leaks in ' plants when the system is unable to • Pmvldes for positive shut down of <br /> double-walled tanks and piping systems maintain required levels ofvacuum pressurized lines ffrequired. <br /> while preventing release of the product into in the secondary space. • Simple.installation,.no need to mess <br /> the environment. The system consists of a . Alarms when liquid is detectedin the .with brine.. - <br /> Vacuum Sensor, which is connected to the seconclarysic <br /> tank or piping Interstice, the Submersible merit ed se meet C space m ntorin <br /> Turbine Pump(STP),which provides a source Uses SIP as the vacuum source.,(Red merit for secondary space rrionitorir�g for <br /> of vacuum, and the Smart Sensor Interface Jacket SIP preferred). ranks and lines as required by AB 2481. <br /> with embedded Pressure Module in a TLS- . Installs in SIP sump and connects to • Satisfies the requirements for Class I - <br /> 350 monitoring system. The Vacuum Sensor the console via Intrinsically,safe wiring Leak Detection w defined by the <br /> is interfaced to Veeder-Root's TLS-350 . Able to share wiring conduit with European Standard EN 13160-2. <br /> monitoring system via intrinsically safe <br /> wiring to provide system status, leak test, Veeder Root sump or line leak senses • Facilitates periodic operability testing. <br /> alarm, and diagnostic information. • loirdaee5 to the Smart Sensor Interface • 3rd Party National Vvbrk Group and <br /> embedded Pressure Module. LG113 listed(pending) <br /> The Vacuum Sensor is available in three <br /> models, one for monitoring double-walled <br /> piping and sump interstices, one for <br /> monitoring double-walled steel tank Operating Temperature Rating: Sensor Console Capability <br /> interstices and one for double-walled -25 degrees C to+50 degrees C The Vacuum Sensor is compatible with <br /> fiberglass tanks. These units differ in the the following consoles: <br /> configuration of-the liquid sensor. In the Cable length: Console Series <br /> Vacuum Sensor for piping and sump, a 8 feet TLS-350R' 8482 <br /> vacuum-housed liquid sensor is used. In the TLS-350' 8470 <br /> Sensor Dimensions: <br /> Vacuum Sensor for tanks an external liquid 5'high x 5"wide 2-deep 'Note: A Smart Sensor Interface with embedded <br /> sensor is also provided which is to be Pressure Module Is required for the use of the <br /> installed in the secondary space at the bottom Vacuum Sensor with the TLS-350 and TLS-350R <br /> of the tank. <br /> Consoles. <br /> Standard Models <br /> Veeder Root P/N Description <br /> Location of Vacuum <br /> 857280-100 SCVS System for Piping&Sumps <br /> '-"-`- 857280-200 SCVS 5 stem for Steel tanks <br /> Sensor for use with j 857280-30x SCVS System for Fiberglass tanks(4'.6',8',10') _ <br /> double wall tanks. - 330020-448 Mounting Kit <br /> .zN� 332217-001 Relief Valve Assembly <br /> 332250-001 Smart Sensor w/Embedded Pressure Sensor module _ <br /> xxxxn-nx 3 Vacuum Sensor Kit[includes mounting kit) <br /> xxxxxx-xxx 4 Vacuum Sensor Ki[(ndudes mounting kit) <br /> For more information call: 1-888-561-7942 <br /> 401 VEEDER-ROOT <br /> *:- <br />