Laserfiche WebLink
OREC IVED <br /> SWRCa,January2002 JUL 07 2 -°f- <br /> 8. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sumps X ENVIRONMFNTAL HEALTH <br /> Fill Riser Containment Sumps are Present,but were Not Tested ❑ nFPARTMENT <br /> Test Method Developed By: ❑Sump Manufacturer ❑Industry Standard ❑Professional Engineer <br /> ❑Other(Spec) <br /> Test ethod Used: ❑Pressure ❑Vacuum ❑Hydrostatic <br /> ❑Other(Spec) <br /> *TestquipmentUsed: Equipment Resolution: <br /> Fill Sump# Fill Sump# Fill Sum # Fill Sump# <br /> Diameter: <br /> Sump Depth: <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Elea 'cal Penetration: <br /> Con on of sump prior to <br /> testin : <br /> Portion of Sump Tested <br /> Sump Material: <br /> Wait time between applying <br /> water and starting test: <br /> Testtart Time: <br /> Inti Readin R,): <br /> Test fnd Time: <br /> FinalAeadin (R,): <br /> Test Duration: <br /> Change in Reading(RF-R,): <br /> Pass/Fail Threshold or Criteria: <br /> TestResult: <br /> Is there a sensor in the sump? <br /> Does the sensor alarm when <br /> either product or water is <br /> detected? <br /> Was sensor removed for testing:? <br /> Was sensor properly replaced and <br /> verified functional after testing? <br /> Comments—(include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />